Table of Contents
Advertisement
Quick Links
Fiber Solution
NetWaySP3L Series
Hardened Ethernet over Fiber PoE+
Switch with Optimized Lithium Iron
Phosphate Battery Charger
Models Include:
NetWaySP3LWP
- Fiber Optic SFP 1G Link,
3-port PoE+ switch and power supply.
- NEMA4/4X, IP66 rated Outdoor enclosure.
NetWaySP3LWPX
- Fiber Optic SFP 1G Link,
3-port PoE+ switch and power supply.
- NEMA4/4X, IP66 rated Outdoor enclosure.
- Accommodates one (1)
12V LiFePO4 battery.
Installation Guide
DOC#: NetWaySP3L Rev. 071620
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
NetWaySP3LX
- Fiber Optic SFP 1G Link,
3-port PoE+ switch and power supply.
- NEMA1 rated Indoor enclosure.
NetWaySP3LPL
- Fiber Optic SFP 1G Link,
3-port PoE+ switch and power supply.
- Backplane version
More than just power.
Embedded
™
TM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Altronix NetWaySP3L Series
Summary of Contents for Altronix NetWaySP3L Series
- Page 1 Embedded ™ Fiber Solution NetWaySP3L Series Hardened Ethernet over Fiber PoE+ Switch with Optimized Lithium Iron Phosphate Battery Charger Models Include: NetWaySP3LWP NetWaySP3LX - Fiber Optic SFP 1G Link, - Fiber Optic SFP 1G Link, 3-port PoE+ switch and power supply.
-
Page 2: Table Of Contents
Recommended Altronix SFP Modules ........ -
Page 3: Overview
Overview: Altronix NetWay Spectrum Indoor/Outdoor Hardened Ethernet over Fiber PoE+ Switches with Optimized Lithium Iron Phosphate Battery Charger provide one (1) 1Gb SFP (Fiber) port and three (3) PoE/PoE+ ports rated up to 60W each passing data and power to PoE/PoE+ compliant devices. These units are designed to support a single 12V LiFePO 4 (Lithium Iron Phosphate) battery for high storage and charge/discharge cycle life reliability. -
Page 4: Enclosure/Backplane Mounting Instructions
Fig. 2 Use Altronix BTL125 12V/4.5AH Lithium Iron Phosphate battery. Note: When battery is not used, a loss of AC will result in the loss of output voltage. CAUTION: Do not use lead acid or gel type batteries. -
Page 5: Recommended Altronix Sfp Modules
Recommended Altronix SFP Modules: Altronix P1MM, P1SM10, P1AB2K and P1GCE are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix Spectrum fiber optic equipment for 1Gb transmission rates. P1MM - For use with Multi-Mode Fiber for distances up to 550m. -
Page 6: Configuring Units For Network Connection
Configuring Units for Network Connection –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Please be sure to visit altronix.com for latest firmware and installation instructions –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Factory Default Settings • IP Address: 192.168.168.168 • User Name: admin • Password: admin 1. Set the static IP address for the laptop to be used for programming to the same network IP address as the NetwaySP3L. -
Page 7: Secure Network Setup
(Fig. 5, pg. 7; Fig. 4a, pg. 5). Continue holding the button until the LEDs on board go Factory Reset through the start up cycle, then release the button. 3. The unit returns to the original factory settings. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– NetWaySP3L Series Installation Guide - 7 -... -
Page 8: Wall Mount Installation
This installation should be made by qualified service personnel. This product contains no serviceable parts. PMK1 and PMK2 outdoor pole mount kits are designed to simplify the installation of Altronix outdoor rated power supplies and accessories housed in models WP1, WP2, WP3 and WP4 NEMA rated enclosures. PMK1 and PMK2 can be mounted on 2”... -
Page 9: Mechanical Drawings And Dimensions
(30.5mm) 0.75” 0.75” 12.5” (317.5mm) 1.20” 1.20” (19.1mm) (19.1mm) (30.5mm) (30.5mm) 11.0” (279.4mm) 0.9375” (23.8mm) 1.40” 1.40” (35.6mm) (35.6mm) 0.9375” (23.8mm) 3.25” (82.6mm) 3.25” (82.6mm) 1.0” (25.4mm) 1.0” 1.0” 10.5” (266.7mm) (25.4mm) (25.4mm) NetWaySP3L Series Installation Guide - 9 -... - Page 10 NetWaySP3LPL Mechanical Drawing and Dimensions (H x W x D approx.): 10.75” x 8.875” x 2.375” (273.1mm x 225.4mm x 60.3mm) 8.875” (225.4mm) 8.25” (209.5mm) 0.25” (6.4mm) - 10 - NetWaySP3L Series Installation Guide...
- Page 11 PADLOCK LATCH ATTACHED WITH RIVETS (Ø 0.375” (9.5mm) PADLOCK EYE) 8.00” (203.2mm) Ø 0.32 (8.1mm) MOUNTING HOLE TYP. 4 PLACES 10-32 X 0.375” (9.5mm) BRASS INSERT (X4) 10-32 X 0.25” (6.4mm) BRASS INSERT (X2) NetWaySP3L Series Installation Guide - 11 -...
- Page 12 WALL MOUNTING HOLE X 4 10-32 X 0.250 BRASS INSERT 4 PLCS. 12.00” (304.8mm) Altronix is not responsible for any typographical errors. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty...
Need help?
Do you have a question about the NetWaySP3L Series and is the answer not in the manual?
Questions and answers