Ballard Designs Callista CF002 Assembly Instructions

PRODUCT NAME: Callista 3 Drawer File Cabinet
ITEM NUMBER: CF002
ASSEMBLED DIMENSIONS: 30.5"H X 18"W X 18"D
LEVELERS: Equipped with Rotary Levelers
installed under each corner/leg. If neces-
sary, adjustments may be made by carefully
lifting applicable corner and turning Leveler
clockwise/counterclockwise.
IMPORTANT
Set furniture into place and level
before anchoring to wall.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 9-24-2024
Serious or fatal crushing injuries can occur from a furniture tip-over
Prevent tipping accidents. Anchor your furniture.
REQUIRED TOOLS:
Phillips Screwdriver
FULLY ASSEMBLED
Assembled Weight: 68 lbs.
Ltr.
Qty.
Hardware/Components Included
2
A
B 1
Front to back. Legal: Side to side.)
FULLY REMOVING DRAWERS
Drawers feature metal glides.
First, fully open/extend Drawer
Push Lever in side rails up on one side
and down on the other while pulling drawer out
Representative
Image
To replace, align glides and push drawer in.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
WARNING
Tip-Over Hazard
ANCHORING HARDWARE INCLUDED
Wall Anchoring
(Anti-tip) Kit
See page 2
Cabinet
(File Drawer features
plastic runner around top edge
for hanging file folders. Letter:
TO REMOVE
MADE IN VIETNAM
Page 1 of 2