Table of Contents
Related Manuals for Ballard Designs CORBEL WS972
Summary of Contents for Ballard Designs CORBEL WS972
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: CORBEL WOODEN BRACKET ITEM NUMBER : WS972 ASSEMBLED: 1.5’’ H x 30’’ W x 12’’ D DIMENSIONS OF ITEM PRODUCTS ARE NOT INTENDED FOR COMMERCIAL USE. UPDATED: 08/20/2020 MADE IN INDONESIA Page 1 of 4...
- Page 2 Ltr. Hardware Included TOOLS NEEDED: -Phillips Screwdriver, Level, Pencil Two person installation suggested. Wall Anchor Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level, padded surface. NOTE: To avoid accidentally Large Screw JF 8 x 1 ¼’’ discarding small parts or hardware, retain all carton contents until assembly and installation are complete.
- Page 3 STEP 1: Determine location on wall for installation, then using a level make pencil marks corresponding to keyhole on back of each Bracket (D). If mark is on a wall stud, drive in a Large Screw (B). If mark is in drywall, punch a small hole then gently tap then drive in a Wall Anchor (A).
- Page 4 STEP 3: Gently place Shelf (E) on top of Brackets (B) and secure by driving in Small Screws (C). Firmly tighten. Cleaning & Care: DO NOT use alcohol based products or spray polisher as they can damage the finish. Dust with soft cloth. One to two times monthly apply beeswax polish as needed. Finish can be affected by heat or extended contact with oils or wine Customer Service: 800-367-2810 Online:...
Need help?
Do you have a question about the CORBEL WS972 and is the answer not in the manual?
Questions and answers