Ballard Designs Lavella SK098 Assembly Instructions

PRODUCT NAME: Lavella Pantry Cabinet
ITEM NUMBER: SK098
ASSEMBLED DIMENSIONS : 82"H x 48"W x 18"D
(C)
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 9-7-2021
Serious or fatal crushing injuries can occur from a furniture tip-over
-Two person assembly suggested.
Ltr. Qty. Hardware/Components Included
12
A
Shelves (B)
3
B
1
C
2
D
SHELVES: Insert Shelf Supports (A)
(A) into pre-drilled holes. Place Shelves (B)
level upon Supports.
(B)
LEVELERS: Cabinet (C) is equipped with
Rotary Levelers installed under each leg. If
necessary, adjustments may be made by
carefully lifting applicable corner and turning
Levelers clockwise/counterclockwise.
NOTE: Misaligned doors may be corrected by adjusting Levelers.
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alcohol based
cleaners or polishers. Promptly remove spills.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
WARNING
Tip-Over Hazard
ANCHORING HARDWARE INCLUDED
Prevent tipping accidents. Anchor your furniture.
REQUIRED TOOLS:
Phillips Screwdriver
Shelf Supports
Wall Anchoring
(Anti-tip) Kits
See page 2
Cabinet (C)
MADE IN INDIA
Page 1 of 2