Page 1
Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Millstone Counter Height Table ITEM NUMBER: SL168 ASSEMBLED DIMENSIONS : 37 1/4”H x 48”W x 30”D Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete.
Page 2
Assemble in location for intended use. Hardware Located Here (A~F) REQUIRED TOOLS: Allen Wrench (included), *Phillips Screwdriver -Two person assembly suggested. Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level, padded surface. Ltr. Qty.
Page 3
Assemble in location for intended use. STEP 1: Carefully invert Top (G) onto a level, padded surface then postion a leg into each corner as illustrated. Insert Allen Bolt (C) with Lock Washer (B) and Flat Washer (A). Fully tighten using Allen Wrench (D).
Page 4
Assemble in location for intended use. OPTIONAL: Connecting Millstone Kitchen Island (SK082) to Millstone Counter Height Table (SL168) STEP 1: Follow Assembly Instructions for Table and fully assemble before proceeding. NOTE: Assemble Table in area with Kitchen Island. STEP 2: Place Kitchen Island in location for use. Slide assembled Table against one end and align edges.