Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ballard Designs SK075
Summary of Contents for Ballard Designs SK075
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Fairmont Kitchen Pantry ITEM NUMBER: SK075 ASSEMBLED DIMENSIONS : 77”H x 45 3/4”W x 23 7/8”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 3/18/2019 Page 1 of 5...
- Page 2 Assemble Pantry in desired location for use. Hardware (A-C) Shelves (D) TOOLS NEEDED: -Phillips Screwdriver, Drill -Two person assembly suggested. Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level, padded surface. NOTE: To avoid accidentally discarding small parts or hardware, retain all carton contents until assembly and installation are complete.
- Page 3 Assemble Pantry in desired location for use. STEP 1: Determine Shelf (D) placement and insert Shelf Supports (B) into corresponding pre-drilled holes. Gently lay and fit Shelf into place by resting each on a Shelf Support. STEP 2: Pantry is equipped with Levelers on all four corners at the base. If needed, turn leveler clockwise/counterclockwise to adjust to level.
- Page 4 Assemble Pantry in desired location for use. STEP 3: Center the Pantry in front of two wall studs and mark the wall. Push Pantry against the wall. Note: Wall Studs are typically 16” apart (center to center). WALL STEP 4: Slide L-Bracket (C) over top corner of Pantry and align (as shown below) with previously marked stud locations on wall.
- Page 5 Assemble Pantry in desired location for use. STEP 5: Pull Pantry away from wall, then firmly secure L-Brackets (C) to wall studs using Screws (A). STEP 6: Gently slide the Pantry under previously installed Brackets (C) and use 2 or more remaining Screws (A) to firmly secure L-Brackets to Pantry top.
Need help?
Do you have a question about the SK075 and is the answer not in the manual?
Questions and answers