Related Manuals for Ballard Designs Paulette SK032
Summary of Contents for Ballard Designs Paulette SK032
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Paulette Cabinet Base ITEM NUMBER: SK032 DIMENSIONS OF ITEM ASSEMBLED: 35 3/4”H X 28”W X 18”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 3-3-2020 Page 1 of 4...
- Page 2 Assemble in location for intended use. REQUIRED TOOLS: Ltr. Qty. Hardware Included - Phillips Screwdriver -Two person assembly suggested. Shelf Supports Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, Wood Plugs level, padded surface. NOTE: To avoid accidentally Wall Anchoring...
- Page 3 Assemble in location for intended use. STEP 2: Cabinet is equipped with Rotary Levelers under each corner. If Doors/Drawer are misaligned or Cabinet is uneven, open doors and insert a Flathead Screwdriver into access hole and turn Levelers clockwise/counterclockwise to adjust. Cover access holes with Wood Plugs (B). Customer Service: 800-367-2810 Page 3 of 4 Online: www.ballarddesigns.com...
- Page 4 WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Large Screw Small Screw WARNING Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.