Related Manuals for Ballard Designs Paulette Pantry SK012
Summary of Contents for Ballard Designs Paulette Pantry SK012
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Paulette Pantry ITEM NUMBER: SK012 DIMENSIONS OF ITEM ASSEMBLED: 83 3/4”H X 28”W X 18 1/4”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. 3/11/2015 Page 1 of 5...
-
Page 2: Tools Needed
NOTE: Assemble the Pantry in desired location for use. Shelves (E) Hardware Located Here (A-D) TOOLS NEEDED: NOTE: When unpacking, lay the parts on -Requires a screwdriver. a padded surface such as the packaging provided. -Power drill suggested. Be sure to locate all hardware before throwing -Assembly requires 2 or more people. - Page 3 NOTE: Assemble the Pantry in desired location for use. STEP 1:Place the Shelf Supports (B) at the desired Shelf heights and lay the Shelves (E) on the Supports. The plate groove should be located at the back of the Pantry. STEP 2:If the door is uneven, adjust the levelers on the bottom corners of the Pantry.
- Page 4 NOTE: Assemble the Pantry in desired location for use. STEP 3:Center the Pantry in front of two Studs and mark the Wall. Push the Pantry against the Wall. Studs Wall STEP 4: Slide the L-Bracket (C) over the top corner of the Pantry Top in front of the previously marked Stud and mark the Wall at the top of the L-Bracket.
- Page 5 NOTE: Assemble the Pantry in desired location for use. STEP 5:Pull the Pantry away from the Wall and attach the L-Brackets (C) to the Studs using the Long Screws (A). If there are not Studs in the desired Pantry location, lightly tap in the Anchors (D) and attach the L-Brackets with the Long Screws.
Need help?
Do you have a question about the Paulette Pantry SK012 and is the answer not in the manual?
Questions and answers