Power-On Screen Displays - FUTABA 9ZAP - PART1 Manual

POWER ON SCREEN DISPLAYS
After the transmitter's power switch is turned
on, the current model number and name is dis-
played (see next page for what happens on the
initial turn-on). Check to verify it is the desired
model, otherwise you will have to change it in the
System menu. There may also be a caution mes-
sage displayed for any special mix functions and/
or non-default flight condition switches that are
turned on. This caution message will be accompa-
nied by a warning sound of six beeps repeated
every two seconds, and will continue until the off-
ending switch is deactivated. You may hit the END
key, or wait a few moments to display the starting
screen.
The Home screen displays the user's name, the
active model memory and flight condition, the
Timer #1 display, the system voltages, and the
trim status. The selection keys to the various
menus are also displayed. To switch to these dif-
ferent screens, press the desired key A to R .
BE SURE TO CHECK THE MODEL NAME AND
CONDITION BEFORE FLIGHT. One of the most
common crash causes is taking off with the wrong
model setup loaded in the transmitter.
Manual Introductory Section, Page 11
Manual Introductory Section
• Displayed for several seconds
- Currently selected model
number and name
• Immediate switch to
start screen