S E R V O (Test M O D E ) - FUTABA 9VAP Instruction Manual

ADJUSTMENTS AND FLIGHT TECHNIQUES
SERVO (Transmitter Test Mode)
Transmitter control movements are shown on a bar graph representing servo movement for
channels 1 through 8. The center of the graph is the neutral position. The bottom half in-
dicates counterclockwise servo rotation and the top half represents clockwise rotation.
Setting Method
1) Select the EDIT screen and move the cursor
to Line 3 with the
play the SERVO screen by pressing the
cursor key, then dis-
[48]
2) Bar graphs proportional to the servo throw
can be observed by operating the control
sticks, levers, and switches of each channel of
the transmitter (1 to 8). This can be used to
test the performance of the transmitter, and
check the effect of new settings and data in-
puts.