FUTABA 7CAP Instruction Manual page 54

• Slave: the controlled channel. The channel that is moved automatically in response to the movement of the master
channel. The second channel in a mixís name (i.e. aileron-to-rudder).
• On/off choices:
• S
: Any of the positions of any of the 5 switches may be used to activate a mix. Up&Cntr, Cntr&Dn options
WITCH
allow the mix to be ONin 2 of the 3 positions of a 3-position S
• NULL (--): No S
WITCH
• Rate: the percentage of the slave's range it will move upon maximum input from the master channel. Ex: RUDDER-
AILERON mix, 50%. Ail range=1". When rudder is moved full right, ailerons move 1/2".
MASTER SLAVE SWITCH & POSITION RATE OFFSET
RUDD AILE
• Offset: Offsets the slave's center relative to the master. Ex: Smoke valve opens wider per throttle servo position when
smoke S is ON . Smoke servo's neutral is moved down from T
WITCH
MASTER SLAVE SWITCH & POSITION RATE OFFSET
THRO CH7
*Assign the CH7 switch to NULL(--). See p.28.
can turn this mix OFF. This mix is active at all times.
NULL (--)
E DOWN
.
WITCH
50% center(default)
HROTTLE
0%(Hi) half throttle(default)
100%(Lo)
54
S center to the bottom.
TICK