Transmitter Controls; Switch Identification/Assignments - FUTABA 7CAP Instruction Manual

TRANSMITTER CONTROLS - AIRPLANE
SW(F)
Snap Roll or
Trainer Switch
SW(E)
Landing Gear
Switch
/CH5
SW(B)
Rudder Dual Rate Switch
/CH7
SW(A)
Elevator Dual Rate Switch
/TH-CUT/P-MIX/TIMER
Rudder
/Throttle
Stick
Throttle
Trim Lever
Rudder
Trim Lever
Edit Keys
This figure shows the default switch assignments for a Mode 2 system as supplied by the factory.
You can change many of the switch positions or functions by selecting a new position within
the setting menu for the function you wish to move. (Example: move aileron dual rates to switch G
* Power LED blinks to indicate if any mix switches are activated.
Be careful not to bend your antenna when you
Antenna
collapse or extend it.
Antenna must be fully extended when flying.
Power
LED*
Carrying Handle
Hook
(for optional neckstrap)
Power Switch
(Up position: ON)
to create triple rates. See p. 34 for details.)
11
VR
Flap Trim Control
This controls CH6, and if flaperon mixing
is activated controls the flap.
SW(G)
Elevator - Flap Mixing or
Airbrake Mixing Switch
SW(D)
Aileron Dual Rate Switch
Elevator Trim Lever
Aileron Trim Lever
Dial
Edit keys
LCD Panel
Elevator
/Aileron
Stick