Flow Chart (Heli) - FUTABA 6EXP Instruction Manual

To enter or leave Programming Mode,
press MODE and SELECT keys
simultaneously for one second.
(press MODE and SELECT keys for one second)
MODE
key
Simultaneously Press the "MODE" and "SELECT" keys and hold them down for one second to enter the programming
mode. Press the keys again (or turn off the transmitter) to exit the programming mode.
FLOW CHART HELI MODE FUNCTIONS
(Screen at Startup)
[Model 2-5]
*1
[CH 2-5]
[CH 2-5]
[CH 2-3]
[2-4]
[2-4]
[2-4]
*1
[2-4]
*1
*1
*1
*1
*2
[CH 2-5]
MODE key
SELECT key
DATA INPUT
lever
*1. Press the DATA INPUT lever
for 0.5 seconds
*2. Press the DATA INPUT lever
for about two seconds
PCM mode onry
32
To change the Stick Mode, turn on
the transmitter holding MODE and
SELECT keys down simultaneously.
Use the DATA INPUT lever to display
the desired stick mode.