Ecostrad AH18CCR-B Instruction Manual

1800 w ratings: 220 v – 240 v; 50 hz; class i; ip65

Advertisement

Model: Ecostrad Apex with Remote
Model no.: AH18CCR-B
1800 W
Ratings: 220 V – 240 V; 50 Hz; Class I; IP65

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AH18CCR-B and is the answer not in the manual?

Questions and answers

Summary of Contents for Ecostrad AH18CCR-B

  • Page 1 Model: Ecostrad Apex with Remote Model no.: AH18CCR-B 1800 W Ratings: 220 V – 240 V; 50 Hz; Class I; IP65...
  • Page 2: Safety Notes

    Introduction The Ecostrad Apex is a versatile infrared heater that provides radiant infrared heat with a soft orange glow. Suitable for wall and ceiling mounting, the Apex with its carbon filament element delivers heat that is strong enough to be effective outdoors but gentle enough for prolonged use in hard-to-heat indoor areas.
  • Page 3 Use & Cleaning 1. The unit must be securely grounded during operation. 2. Do not cover the unit with anything during operation or a short time after it's shut down. 3. Do not wrap the power supply cord around the unit. 4.
  • Page 4: Parts Description

    PARTS DESCRIPTION PART NAME PART NAME Expansion Bolt M6*70 Lower L Bracket Main Switch Upper L Bracket Control Panel Washer Screw M6*8 Spring Washer Allen Key Screw Nut M6 Remote Control Screw M6*16...
  • Page 5: Using The Heater

    Using the Heater 1. Plug the unit into a socket. Make sure the power supply is the same as rated: 220 – 240 V. 2. Switch the heater on via the large switch on the left side. The LED indicator light will flash to show the heater is on standby.

This manual is also suitable for:

Apex with remote

Table of Contents