Assembly / Adjustment; Receiver And Servo Connection; Receiver Antenna Installation - FUTABA 2PL-2.4GHZ Instruction Manual

As you connect the receiver, servos and other components, do so in accordance with the
"Assembly Precautions".
Connections when a E.S.C. MC230CR or MC330CR are used.
Gas Powered Model
Install the R603GF receiver on the car as follows:
Note: The operating range may become shorter, depending on where the
receiver and the antenna are mounted.
WARNING
Install the antenna in the higher place as shown in the figure.
Keep the antenna as for away from the motor, ESC and other
noise sources as possible.
Put the antenna in the antenna tube to protect it.
Do not cut the antenna.
Do not bend the coaxial cable. Doing so causes damage.
12

Assembly / Adjustment

Assembly / Adjustment Assembly / Adjustment

Receiver and Servo Connection

Power Switch
E.S.C.
Receiver
Receiver
To Receiver
Battery
Power Switch

Receiver Antenna Installation

Connects to Motor
Connects to Battery
Steering Servo
Throttle Servo
Steering Servo
Antenna
tube
Antenna
Coaxial
cable
R603GF