Assembly / Adjustment; Receiver And Servo Connection - FUTABA 2PH Instruction Manual

Receiver And Servo Connection

As you connect the receiver, servo's and other components, do so in accordance with the
"Assembly Precautions" listed on the next page.
Connections when a E.S.C. MC230CR or MC330CR are used.
E.S.C.
FP-R122JE
AM 2 CHANNEL RECEIVER
X'TAL
Receiver
Gas Powered Model
FP-R122JE
AM 2 CHANNEL RECEIVER
X'TAL
Receiver
To Receiver
Power Switch
Battery
Connect the battery in accordance with instructions provided with model you are
installing this system in.
Use the R2-BSS-N battery holder to match your application.
If your model has a mechanical type speed control (Servo Driven for electric powered
models) inspect this component for a power supply regulator or voltage dropping Diode.
These device's will cause a voltage drop to the receiver. Be sure to remove them prior
to installation in your model.

Assembly / Adjustment

Power Switch
E
B C
(CH2)
CH.2
CH.1
(CH1)
BATT
(CH2)
B E C
CH.2
CH.1
BATT
(CH1)
(BATT)
Connects to Motor
Connects to Battery
Steering Servo
Throttle Servo
Steering Servo
9