Reference; Ratings - FUTABA 2PH Instruction Manual

T2PH / T2PHKA
Transmitter
(2 channels, AM transmitter)
Transmitting frequency:
27, 29, 40, 41, 72 or 75 MHz
Modulation method: AM
Power requirement:
12V (penlight battery X 8)
Current drain: 250mA
R122JE
Receiver
(2 channels, AM receiver)
Receiving frequency:
27, 29, 40, 41, 72 or 75 MHz
Intermediate frequency: 455kHz
Power requirement: 4.8 - 8.4V
Current drain: 30mA (at 4.8V / No signal)
Size: 47.2X33.3X17.3mm
Weight: 16.6g
16

Reference

*Specifications and ratings are subject to change without prior notice.

Ratings

S3003
Servo
(standard servo)
Power requirement:
4.8V or 6V (common with receiver)
Current drain: 8mA (at 6V / Idle)
Output torque: 3.2kg-cm (at 4.8V)
Operating speed: 0.23sec/60 digree (at 4.8V)
Size: 40.4x19.8x36mm
Weight: 37.2g
MC230CR / MC330CR
E.S.C.
(Electronic speed control)
Operating system: Forward, reverse, and brake
operations are all linear.
Power requirement: Nicd battery 6-7 cells
7.2 to 8.4V
PWM frequency: 1.5kHz (fixed)
Setting: One-touch input by pushbutton switch.
Set data is saved to built-in EEPROM.
Current capacity (FET rating):
Forward=90A/200A, reverse=45A/100A
Case size: 27.1x33.3x12.8mm
(excluding protruding parts)
Silicon cord gauge size:
AWG16/AWG14 equivalent
Weight: 44/45g
(including connectors and switches)
BEC voltage: 6.0V