Metra Electronics 95-7804 Installation Instructions Manual

For honda accord 2013-2017

Advertisement

Available languages

Available languages

KIT COMPONENTS
• A) Radio housing trim panel • B) Radio brackets • C) Top bracket • D) (6) White panel clips • E) (8) #6 x 3/8" Phillips screws
• F) (4) #8 x 3/8" Phillips screws
A
The World's best kits.
®
Honda Accord
Visit
MetraOnline.com
specific applications
KIT FEATURES
• ISO DDIN radio provision
• ISO DIN radio provision with
pocket sold separately
• Painted two-tone to match the
factory dash
B
C
E
MetraOnline.com
2013-2017
for more detailed information about the product and up-to-date vehicle
95-7804B - Black with Silver accent
95-7804HG - Black with High
Gloss accent
• Factory screen is no longer
operational.
D
F
© COPYRIGHT 2025 METRA ELECTRONICS CORPORATION
95-7804
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly .............................................. 2-3
Kit Preparation .......................................................4
Kit Assembly ..........................................................5
WIRING & ANTENNA CONNECTIONS
Suggested AXXESS interface AXHN-3.
Visit axxessinterfaces.com or metraonline.com
for addional A/V and steering wheel control
interface options.
Antenna Adapter: 40-HD11
For models EX and up use 40-HD12 plus
44-EC204 (at tuner brain in rear of car)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 2/7/25 INST95-7804

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 95-7804 and is the answer not in the manual?

Questions and answers

Summary of Contents for Metra Electronics 95-7804

  • Page 1 With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product. The World’s best kits. ® MetraOnline.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 2/7/25 INST95-7804...
  • Page 2: Dash Disassembly

    DASH DISASSEMBLY 1. Unclip and remove the side trim panels 4. Unclip and remove the small trim panel from each side of the console. (Figure A) between the radio and steering column. 2. Remove (2) Phillips screws exposed on Note: Models with auto climate will pocket then remove the pocket.
  • Page 3 DASH DISASSEMBLY (CONT) 6. Remove (2) Phillips screws on top of 8. Remove (1) Phillips screw from each A/C radio. (Figure E) vent then unclip and remove the vents. (Figure G) 7. Unclip and remove the radio assembly. (Figure F) 9.
  • Page 4: Kit Preparation

    KIT PREPARATION 1. Attach the hazard light switch to the radio trim panel using (2) of the supplied #8 x 3/8” Phillips screws. (Figure A) 2. Attach the (6) white panel clips to the radio housing trim panel. (Figure A) Continue to Kit Assembly (Figure A) 386.257.1187...
  • Page 5: Kit Assembly

    KIT ASSEMBLY 1. Attach the radio brackets to the radio 5. Locate the factory wiring harness and housing trim panel using (4) of the #6 x antenna connector in the dash, and 3/8” Phillips screws. (Figure A) complete all necessary connections to the radio.
  • Page 6 386.257.1187 MetraOnline.com...
  • Page 7 REV. 2/7/2025 INST95-7804...
  • Page 8 Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 5:00 PM Sunday: 10:00 AM - 4:00 PM Metra recommends MECP certified technicians The World’s best kits. ® MetraOnline.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 2/7/25 INST95-7804...
  • Page 9 Al probar el equipo del mercado de accesorios, asegúrese de que todo el equipo de fábrica esté conectado antes de encender el llave de encendido. The World’s best kits. ® MetraOnline.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 2/7/25 INST95-7804...
  • Page 10: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO 1. Desenganche y quite los paneles de 4. Desenganche y quite el panel de la moldura laterales a cada lado de la moldura pequeña entre el radio y la consola. (Figura A) columna de dirección. 2. Quite los (2) tornillos Phillips expuestos en Nota: Los modelos con control la cavidad, luego quite la cavidad.
  • Page 11 DESMONTAJE DEL TABLERO (CONT) 6. Quite los (2) tornillos Phillips que están 8. Quite el (1) tornillo Phillips de cada arriba del radio. (Figura E) rejilla de aire acondicionado y luego desenganche y quite las rejillas. 7. Desenganche y quite el ensamble del (Figura G) radio.
  • Page 12 PREPARACIÓN DE KIT 1. Una el interruptor de las luces intermitentes al panel de la moldura del radio usando (2) de los tornillos Phillips suministrados #8 x 3/8”. (Figura A) 2. Coloque los (6) ganchos blancos del panel en el panel de la moldura de la carcasa del radio.
  • Page 13: Ensamble Del Kit

    ENSAMBLE DEL KIT 1. Coloque los soportes del radio en el 5. Ubique el arnés del cableado de fábrica panel de la moldura de la carcasa del en el tablero. Metra recomienda usar el radio usando (4) de los tornillos Phillips adaptador de acoplamiento adecuado suministrados #6 x 3/8”.
  • Page 14 386.257.1187 MetraOnline.com...
  • Page 15 REV. 2/7/2025 INST95-7804...
  • Page 16 Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 5:00 PM Sunday: 10:00 AM - 4:00 PM Metra recomienda MECP técnicos certificados The World’s best kits. ® MetraOnline.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 2/7/25 INST95-7804...

Table of Contents