Threading The Machine - ELNA 6600 Instruction Manual

Threading the Machine

r w
Raise the presser foot. Press the "Up/Down Needle" key
q until the needle is in an up position.
q
e
t
y
w
Pull the thread under the hook and around upper thread
guide w.
Guide the thread down right channel and around the
checkspring holder e.
e
Firmly pull the thread from right to left, over the take-up
lever and down into the take-up lever eye r.
r
Proceed down left channel and through the lower thread
t
guide t.
Slide the thread to the left behind the needle bar thread
guide y.
Thread the needle from front to back manually or use the
built-in needle threader.
y
25