Table of Contents
Advertisement
q
Basting Stitch
The basting stitch can be used to temporarily hold
together two or more layers of fabric. Use a fine needle
to avoid leaving permanent needle marks.
Select 030.
Lower the feed dog. Set foot pressure dial to 2
or 1. Loosen needle tension to 3.
The LCD screen will briefly show a message.
How To Attach Open Toe Embroidery/Darning Foot
w
Raise the needle and presser foot. Turn OFF power
switch. Loosen set screw q and remove shank. Place
the open toe embroidery/darning foot on the presser bar
with the pin w over the needle clamp screw e; tighten
set screw. Turn ON power switch.
e
Pull needle and bobbin threads behind the presser foot.
Place fabric under foot and lower presser foot. Start
machine. The machine will sew one stitch and stop.
Hold the fabric firmly and move it to the area for the next
stitch. Start machine.
Continue the procedure until all basting is complete.
CAUTION: Do not pull the fabric when sewing; the
56
•
When basting is complete, reset foot pressure dial,
remove the open toe embroidery/darning foot, attach
shank and raise the feed dog.
needle could be deflected and break.
Hide quick links:
Advertisement
Table of Contents
