q
e
q
w
SECTION VIII - Taking Care of Your Machine
Your machine has been meticulously designed and
manufactured to give you a lifetime of sewing pleasure.
Do not store the machine in a high humidity area, near a
heat radiator or in direct sunlight. The machine is self-
lubricating, however, the area around the bobbin and
hook must be cleaned each time the machine has had
extensive use. Do not dismantle the machine further than
explained on these pages. Clean the outside of the
machine with a soft cloth and pure soap.
Cleaning the Bobbin Area
Loose threads and dust may cause puckered stitches
and thread breakage during stitching. Check for lint
buildup after each project is completed.
Press the "Up/Down Needle" key until the needle is
raised. Turn off power switch. Unplug the machine before
cleaning.
q
w
w
e
Cleaning the Hook Area and Feed Dog
q
w
79
Slide the bobbin cover plate release button to the
right to remove the bobbin cover plate.
Take out the bobbin; brush out dust and lint. (You can
also use a small vacuum cleaner.)
Insert the bobbin and attach the bobbin cover plate.
Remove the presser foot, bobbin cover plate, needle
and bobbin. Use the screwdriver supplied with the
machine to remove the screw on the left side needle
plate.
Remove the needle plate. Lift up and remove the
bobbin case.