Table of Contents
Advertisement
Test sew the buttonhole on a sample swatch of the same
fabric. Include the interfacing and any seam allowances
that will be in the actual garment. This is very important
to ensure the buttonhole style and fabric are compatible.
Sensor Buttonholes (Totally Automated Buttonholes)
011
012
013
Select a buttonhole style - 9 through 018.
014
015
016
017
018
The LCD screen will briefly show an illustration advising
that the buttonhole lever be lowered. Alter the buttonhole
width to match the fabric and thread. See page 46.
When attaching buttonhole foot (R), make sure the
button opening is at the back of the foot.
Extend the buttonholder q to the back and place the
button in it. Push the holder together tightly around the
button.
Placing the button in the automatic buttonhole foot (R)
automatically sets the size of the buttonhole. The
buttonholder adjusts for buttons with a diameter between
0.5 cm (3/16˝) and 2.5 cm (1˝). If your button is larger
q
than 2.5 cm (1˝), see page 48.
Pull the buttonhole lever down as far as it will go.
42
Hide quick links:
Advertisement
Table of Contents
