Circle Sewing; Large Scallop Border - ELNA 6600 Instruction Manual

Ba
13cm
Bb
(51/8˝)
A B

Circle Sewing

The circular sewing pivot pin is inserted into the
extension table and provides a pivot point to sew perfect
curves or circles for doilies or large scallops. Use either
utility or decorative stitches.
Select a decorative stitch.
Fold fabric into quarters to determine center. Pierce
center of fabric with pivot pin. Insert pivot pin into hole on
the extension table. Lower presser foot and sew. Smooth
the fabric out evenly from the center to the front of the
foot by hand.
NOTE: Light to medium weight fabrics will need a

Large Scallop Border

Create scallops for beautiful fabric edges.
Select 2.
Attach satin stitch foot F.
Change stitch width to 2.5 or wider and stitch length to
0.3 or higher.
Draw two lines 2.5 cm (1˝) apart on the fabric with a
washable fabric marker. Insert pivot pin through line (A)
and place pivot pin in center pivot hole on table. Begin
sewing at line (Ba) and stop at line (Bb).
Bc
To form second scallop, insert pivot pin through line (A),
13 cm (5 1/8˝) away from first pivot point. Pivot fabric and
check that scallops will intersect. Begin sewing at line
(Bc) and stop at line (Bd).
Bb
A B
Sew remaining scallops using same method. Trim fabric
away to create large scallop border.
66
stabilizer to sew the circle/curve correctly.