Applique Sewing; Patchwork - ELNA 5200 Instruction Manual

Hide thumbs Also See for 5200:
Table of Contents

Advertisement

q
r
q
w
e
q
w
e

Applique Sewing

Machine Settings
q Pattern:
w Presser foot:
e Needle thread tension:
r Presser foot pressure:
Place the applique on the fabric and baste it in place.
Sew, guiding the edge of the applique along the slit q
on the foot, so that the needle falls off the edge of the
applique when it swings to the right.
NOTE:
When changing the sewing direction at a corner or
curve, lower the needle into the applique at the left
swing and turn the fabric to a new direction.

Patchwork

Machine Settings
q Pattern:
w Presser foot:
e Needle thread tension:
Sew the seam with straight stitch and press seam
allowance to open. Sew pattern #29 on the right side
of garment centering over the seam line.
76
#28
Satin stitch foot F
1–4
2
#29
Satin stitch foot F
1–4

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5200 and is the answer not in the manual?

Questions and answers

Mary Selph
April 10, 2025

How to adjust width and length of zigzag stitch on 5200 Elna?

1 comments:
Mr. Anderson
April 10, 2025

To adjust the width and length of the zigzag stitch on the ELNA 5200:

1. Activate stitch width mode by pressing the mode key. The stitch width can then be adjusted between 0.0 and 7.0 using the plus or minus keys.
2. To adjust stitch length, press the mode key again to switch to stitch length adjustment (the middle green light turns on). The preset value is "5.0", and it can be changed using the plus or minus keys.

This answer is automatically generated

Brenda Hooper
April 20, 2025

How to thread the bobbin

This manual is also suitable for:

Experience 540Experience 540 sExperience 520 s

Table of Contents

Save PDF