Replacing The Bobbin Case; Replacing The Light Bulb - ELNA 2600 Instruction Manual

z
x
c q
r
e
q
w
w
e
e
r

Replacing the Bobbin Case

z Insert the bobbin case into the hook race.
x Make sure the knob of the bobbin case fits next to
the stopper on the race.
q Knob
w Stopper
c Replace the bobbin.
Attach the needle plate, inserting the two guide pins
into the holes in the needle plate. Tighten the screw
firmly with the screwdriver.
e Guide holes
r Screw
Clean the machine with a soft cloth. Do not use chemical
solvents.
Store the machine in cool and dry place.
Do not store the machine in an area of high humidity,
near a radiator or in direct sunlight.

Replacing the Light Bulb

WARNING:
When replacing the bulb, switch off and unplug the
machine.
Wait for the light bulb to cool down before touching it.
Remove the cap and screw. Remove the face plate.
q Cap
w Screw
e Face plate
Push and turn the bulb counterclockwise to remove it.
Push and turn the bulb clockwise to replace it.
r Light bulb
42