Changing Needles; Needle And Fabric Chart - ELNA 2600 Instruction Manual

w
q
r

Needle and Fabric Chart

WEIGHT
FABRIC
Very Light
Chiffon, Georgette, Fine Lace, Organdy
Net, Tulle
Light
Batiste, Voile, Lawn, Pure Silk, Crepe de Chine,
Sheer Crepe, Chambray, Handkerchief Linen,
Gingham, Challis, Percale, Wool Crepe, Peau de
Soie, Taffeta, Satin, Silk Surah, Satin-backed
Crepe, Qiana
Single Knits, Jersey, Swimwear, and Tricot
Leather, Suede
Flannel, Velour, Velvet, Muslin, Velveteen,
Medium
Poplin, Corduroy, Broadcloth, Linen, Chintz,
Gabardine, Felt, Terry, Burlap, Quilted Fabrics
Double Knits, (synthetic and natural) Stretch
Velour, Stretch Terry, Sweater Knits
Leather, Vinyl, Suede
Denim, Sailcloth, Ticking
Heavy
Double Faced Wool, Heavy Coating, Fake Fur,
Drapery Fabrics
Leather, Suede
Very Heavy
Canvas, Duck, Upholstery Fabrics
Topstitching for Special Finishes

Changing Needles

q
Always make sure to turn the power switch off and
disconnect the machine from power supply before
changing the needle.
Turn off the power switch.
Raise the needle by turning the flywheel and lower the
presser foot.
e
z Loosen the needle clamp screw by turning it
counterclockwise.
Remove the needle from the clamp.
q Needle clamp screw
x Insert a new needle into the needle clamp with the
flat side of the needle to the rear.
When inserting the needle into the needle clamp,
push it up against the stopper pin and tighten the
needle clamp screw firmly.
w Stopper pin
e Flat side
To check needle straightness, place the flat side of the
needle onto something flat (a needle plate, glass etc.)
The gap between the needle and the flat surface should
be consistent.
Never use a blunt needle.
r Gap
8
CAUTION:
TYPE of NEEDLE
Universal
Ball Point
Stretch
Universal
Stretch
Ball Point
Wedge Point
Leather
Universal
Ball Point
Wedge Point
Leather
Denim
Universal
Wedge Point
Leather
Universal
Topstitching
NEEDLE SIZE
9 (65)
9 (65)
11 (75)
11 (75)
12 (80)
11 (75)
11 (75)
11 (75)
14 (90)
14 (90)
14 (90)
16 (100)
16 (100)
16 (100)
18 (110)
16 (100)
14 (90)