Replacing The Bobbin Case; Changing The Light Bulb - ELNA 6001 Instruction Book

PDFMAILER.DE
3
4
5
ƒ Clean the feed dog and hook area with the lint
brush. Wipe out gently with soft, dry cloth. (You
can also use a small vacuum cleaner.)
1

Replacing the Bobbin Case

m Insert the bobbin case so the knob fits next to
the stopper in the hook area.
1. Stopper
2. Knob
2
n Replace the needle plate, inserting the two
needle plate guide pins into the holes in the
needle plate. Replace the screw.
After cleaning, be sure to replace the needle,
presser foot and bobbin.

Changing the Light Bulb

The sewing light is located behind the face plate.
Unplug the machine.
Remove screw button and screw. Pull away face
plate.
Pull out light socket. Pull out light bulb. Push in light
bulb with pins aligned to holes in light socket. Push
in light socket.
Replace face plate, screw and screw button.
NOTE: Only use same type light bulb rated 12 Volts,
5 watts.
52