q
z
x
e
c
r
v
t
w
y
Inserting the bobbin
z Place the bobbin in the bobbin case with the thread
running off as illustrated.
q Thread
x Guide the thread into the front notch on the front side
of the bobbin case. Draw the thread to the left, sliding
it between the tension spring blades.
w Front notch
e Tension spring blade
c Continue to draw the thread lightly until the thread
slips into the side notch.
r Side notch
v Pull out about 4" (10 cm) of thread. Attach the bobbin
cover plate. Refer to the chart on the bobbin cover
plate for proper threading.
t Thread
y Bobbin cover plate
11