Download  Print this page

Seam Guides On The Needle Plate; Turning A Square Corner - ELNA 2600 Instruction Manual

Hide thumbs



Seam guides on the needle plate

The seam guides on the needle plate help you to measure
seam allowance.
The numbers indicate the distance between the center
needle position and the seam guide.
q Seam guides
Spacing (cm)
1.5 2.0 1.3 1.6 1.9
Spacing (inch)
(5/8) (3/4) 1/2 5/8 3/4

Turning a square corner

The cornering guide helps you maintain a 5/8" (1.6 cm)
seam allowance when sewing a corner.
When the fabric edge facing you lines up with the cornering
guide as illustrated, stop stitching and lower the needle
into the fabric by turning the flywheel towards you.
Raise the presser foot and pivot the fabric so the edge of
the fabric will align with the 5/8" (1.6 cm) seam guide.
Lower the presser foot and start stitching in the new
w Cornering guide
20 4/8 5/8 6/8


Table of Contents

   Also See for ELNA 2600

This manual is also suitable for:

2600 series 2800 series

Comments to this Manuals

Symbols: 0
Latest comments: