How to Use Cintiq21UX
Mounting the Cintiq21UX on the Stand
The product may be positioned vertically and secured to the stand so that it is at a
convenient angle (see page 18) after full stop. Set the product on the stand so that it is in
a vertical position. Fasten it to the stand with the stand-securing screws (see page 9) so
that it does not rotate
Using the Tablet in a Face-Up Position
The tablet may be removed from the stand, and used face up on a desktop or other
suitable surface. For this type of use, the cable position needs to be adjusted so that
it sticks out of the top of the
tablet.
Turn the tablet over so that it
1
is face down.
To avoid scratching or otherwise
damaging the display, first lay a
cushion or other soft material out,
and then place the unit face down
on top.
Remove the screws holding
2
the shaft bearing in place.
3
large cover
cushion
2
19