The Pen And Side Switch Do Not Operate Correctly (For Both Windows And Macintosh) - Wacom DTZ-2100D User Manual

Condition
The picture is distorted
The picture appears wavey
The picture flickers
The picture is not clear
The picture appears doubled or in
triplicate
The picture is out of position
The picture size is incorrect
The picture is dark.
Waves and vertical stripes appear
in the picture.
The picture colour is uneven.
The colour white does not display
as white.

The Pen and Side Switch do not Operate Correctly (For Both Windows and Macintosh)

Condition
The pen nib produces a click even
when only very lightly coming in
contact with the screen.
The pen does not produce a click
unless excessive pressure is used.
The pen nib produces a click prior
to coming into contact with the
screen.
The pen nib and side switch do not
work.
The side switch does not work.
The pen cannot be double-clicked
using the pen nib.
The pressure function cannot be
used.
28
What to Do
•Adjust the phase and clock.
•Verify that your computer display adapter is compatible
with the product.
•Verify that the graphics mode and frequency for the
input signal are compatible with the product.
•Adjust the computer's refresh rate (vertical frequency)
for optimal display.
•Adjust the contrast and brightness.
•Adjust the phase and clock.
•Set your computer's resolution to UXGA (1600 x 1200).
•Do not add an extension to the DVI-I display cable and
refrain from using the input selector.
•Connect the DVI-I display cable firmly to the connector.
•Adjust the phase and clock.
•Adjust the horizontal and vertical positioning.
Depending on the input signal and video card, the
picture may not entirely fill the screen.
•Adjust the brightness.
•Adjust the phase and clock.
•Adjust the colour temperature.
What to Do
Use the control panel to set the pen nib sensitivity to
Firm setting.
Use the control panel to set the pen nib sensitivity to
Soft setting.
Use the control panel to set the pen nib sensitivity to
Firm setting.
When the status lamp turns blue in response to the pen
nib being moved to close proximity to the screen, either
the pen or the tablet is probably defective.
Please verify that the status lamp turns blue when the
pen nib and side switch are pushed. If the lamp doesn'
t change colours, this probably indicates that either the
pen or the tablet is probably defective.
Verify that the side switch setting in the control panel
isn't set to Not Available.
If possible, quickly click in the same area.
You can also set the side and second side switches so
that one click is the equivalent of a double-click.
In the control panel, set the double-clicking interval to a
longer setting and set the pen nib sensitivity to a lighter
setting.
Verify that the double-click speed setting is not too fast
in the regular mouse control panel.
Please refer to your software application and the store
where you bought the application to verify whether it
is pressure function-enabled. Some applications have
special settings that must be established before the
pressure function becomes operational.
The tablet driver probably is not installed properly. Try
re-installing it.
Reference
P.14-17
–
P.30
–
P.14-17
P.14-17
–
–
–
P.14-17
P.15-17
P.15-17
P.14-17
P.15-17
Reference
P.24-25
P.24-25
P.24-25
P.7
P.24-25
–
P.24-25
P.24-25
–
–
P.12