Product Specifications - Wacom DTF-521 series Installation And User Manual

DTF521_Manual.fm Page 43 Tuesday, February 28, 2006 10:36 AM
Product specifications
General specifications
Physical dimensions (W x D x H)
Weight
Input voltage
Power consumption
Operating temperature and humidity
Storage temperature and humidity
Certification and compliance
LCD monitor
Display
Screen size
Signal inputs
Signal outputs
Resolution
Refresh rate
Pixel pitch
Color depth
Response time (refresh rate)
Brightness
Contrast ratio
Plug and Play
LCD quality
344.0 x 300.0 x 49.0 mm (13.6 x 11.8 x 1.9 in), excluding stand
4.6 kg (10.1 lb), including stand
12 VDC
23W or less
5° to 35° C, 20 to 80% RH (non-condensing)
-10° to 60° C, 20 to 90% RH (non-condensing)
(maximum storage humidity is 38% at a temperature of 60° C, and
maximum storage temperature is 42° C at a humidity of 90%)
FCC part 15 class B, CE, EDID 1.3, C-tick, RoHS
a-Si TFT active matrix LCD
15.0 in, diagonal
VGA (Analog RGB)
VGA (Analog RGB)
1024 x 768 pixels (XGA), 800 x 600 pixels (SVGA),
640 x 480 pixels (VGA)
45 to 70 Hz (vertical) in XGA mode,
45 to 75 Hz (vertical) in other modes
All scan modes are non-interlaced.
0.297 x 0.297 mm (0.012 x 0.012 in)
16.2 million (6 bits for RGB + FRC)
16 ms (rise and fall)
2
250 cd/m (typical)
500:1
DDC2B
Each DTF-521/PL-521 LCD panel is produced under very stringent
quality standards. Production techniques cannot guarantee an
absolutely perfect TFT display. Wacom does not allow any pixel to be
always white or always black. A small number of pixels (4 or less) are
allowed to show a wrong color for some parts of the color spectrum.
This does not mean the display is defective.
Appendix
page 43