Ap Array - D-Link AirPremier DAP-3690 User Manual

Section 3 - Configuration
The AP Array window allows users to create a set of devices on a network that are organized into a single group in order to increase ease of
management. Once a user has made the desired settings, click the Save button to let the changes take effect.
Enable AP Array:
Check this box to enable the AP array function. The three
modes that are available are Master, Backup Master, and
Slave. APs in the same array will use the same configuration.
The configuration will sync the Master AP to the Slave AP and
the Backup Master AP when a Slave AP and a Backup Master
AP join the AP array
AP Array Name:
Enter a name for the AP array you have created.

AP Array

Enter a password that will be used to access the AP array you
Password:
have created.
Click the button to initiate a scan of all the available APs on
Scan AP Array List:
the network.
Connection Status:
This displays the status of the current AP array.
D-Link DAP-3690 User Manual
AP Array
39