D-Link AirPremier DAP-3690 User Manual page 30

Airpremier n concurrent dual band outdoor poe access point

Hide thumbs Also See for AirPremier DAP-3690:

Table of Contents

Section 3 - Configuration

Set the maximum amount of users that are allowed access (zero to 64 users).To use this feature, the Connection Limit above

User Limit (0 - 64):

must be enabled. For most users, a limit of 10 is recommended. The default setting is 20.

Network Utilization:

Set the maximum utilization of this access point for service. The DAP-3690 will not allow any new clients to associate with the

AP if the utilization exceeds the value the user specifies. Select a utilization percentage between 100%, 80%, 60%, 40%, 20%,

or 0%. When this network utilization threshold is reached, the device will pause one minute to allow network congestion to

dissipate.

Multicast Rate: Adjust the multicast packet data rate here. The multicast rate is supported in AP mode, (2.4 GHZ and 5 GHZ) and WDS with AP

mode, including Multi-SSIDs.

D-Link DAP-3690 User Manual

Table of Contents