Dhcp Server (Static Pool Setting) - D-Link AirPremier DAP-3690 User Manual

Section 3 - Configuration
The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static pool allows specific wireless
stations to receive a fixed IP without time control.
Once a user is finished, click the Save button to let the changes take effect.
Function Enable/ Dynamic Host Configuration Protocol (DHCP) assigns IP
Disable: addresses to wireless devices on the network. This protocol
simplifies network management and allows new wireless
devices to receive IP addresses automatically without the
need to manually assign IP addresses. Select Enable to
allow the DAP-3690 to function as a DHCP server.
Host Name:
Enter the name of the host computer in this text box.
Assigned IP:
Use the Static Pool Settings to assign the same IP address
to a device every time you start up. The IP addresses
assigned in the Static Pool list must NOT be in the same
IP range as the Dynamic Pool. After you have assigned
a static IP address to a device via its MAC address, click
Save; the device will appear in the Assigned Static Pool
at the bottom of the window. You can edit or delete the
device in this list.
Assigned MAC
Enter the MAC address of the device requesting association here.
Address:
Subnet Mask: Define the subnet mask of the IP address specified in the "IP Assigned From" field.
D-Link DAP-3690 User Manual

DHCP Server (Static Pool Setting)

44