Wireless Settings - Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual

Configuring the Cisco WVC210 Internet Camera Software
Setup > Basic Settings
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide

Wireless Settings

• SSID—Enter the network's SSID or network name here. The default is
ciscosb.
• Network Type—Select the network's mode. Choices are: Infrastructure or
Ad-hoc.
• Channel No—If the camera is set to Ad-hoc mode, select the appropriate
channel from the list provided to correspond with your network settings. All
devices in your wireless network must use the same channel in order to
function correctly. In Infrastructure mode, you cannot specify a channel
setting on the Wireless-G Internet Camera. It is automatically configured to
match the device your camera is connected to
• Security—Click Edit Security Settings to display the Wireless Security
window.
• Security Mode—Select the appropriate option based on your wireless
network configuration. Options are: Disable, WEP, WPA Personal, WPA2
Personal, WPA/WPA2 Enterprise.
Disable
This option implements no security on your wireless network. Data is not
encrypted before transmission.
WEP
WEP is a basic encryption method, which is not as secure as later methods such
as WPA. WEP stands for Wired Equivalent Privacy.
• TX Key—Select the number of the key used on the wireless network.
• WEP Encryption—Select the appropriate option for key length based on
your network settings.
• Passphrase—Type in the passphrase used to generate WEP keys on your
network and click Generate.
• Key 1-4—Key values can be entered in manually or generated from a
passphrase.
• Authentication—Select the appropriate authentication type used on the
wireless network.
.
8
38