Applications > Motion Detection; Event - Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual

Configuring the Cisco WVC210 Internet Camera Software
Applications > Motion Detection
Applications > Motion Detection
NOTE
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
The Applications > Motion Detection window shows options for Event and Pan/Tilt.

Event

Complete the Mail or FTP sections prior to enabling alerts.
• Enable E-mail Alert—If enabled, e-mail alert with attachments are sent
when motion is detected.
• Enable FTP Alert—If enabled, FTP alert with attachments are sent when
motion is detected.
• Enable SMB/CIFS Alert—If enabled, connects to the SMB/CIFS Server
when motion is detected.
- SMB/CIFS Server—Enter the server hostname or IP address of your
NAS device (SMB/CIFS host server).
- File Path—Enter the folder name to upload video to your NAS device
(SMB/CIFS host server).
- Login Name—Enter your login name for the NAS device.
- Password—Enter your password for the NAS device.
Checking either alert box will display options for the attachment.
• Interval—Defaults to two minutes before detecting the next event For no
delay, choose 0.
• Attachment Type—JPEG Image or Video.
• Frame Rate—Defaults to 1 fps.
• Pre-Capture Length—Defaults to 0 seconds. It is definable from 0 to 4
seconds.
• Post Capture Length—Defaults to 1 second.
8
54