Applications > Mail - Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual

Configuring the Cisco WVC210 Internet Camera Software
Applications > Mail
Applications > Mail
NOTE
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
Clicking on the Applications > Mail window shows options for Primary and
Secondary SMTP Servers and E-mail Setup.
Only one SMTP server is used, even if both the primary and secondary SMTP
servers are enabled. The secondary SMTP server is used if the camera can't
connect to the primary server.
Primary SMTP Server
• Enable Primary SMTP—Check the box to enable an SMTP Server. This is
disabled by default.
• SMTP Mail Server—Enter the address of the Simple Mail Transport
Protocol (SMTP) server to be used to send e-mail.
• Port—Enter the port number for the mail server. The default is 25.
• Authentication—Check the box if your mail server requires authentication
and enter the following options:
- Account Name—Enter the account name to be used on the e-mail
server.
- Password—Enter the password associated with the account name.
• Test SMTP Server—Sends a test e-mail to verify the connection with the
SMTP Mail server.
Secondary SMTP
• Enable Secondary SMTP—Check the box to upload to the Secondary
SMTP server if the camera can not connect to the primary SMTP server.
• SMTP Mail Server—Enter the address of the SMTP server to be used to
send e-mail.
• Port—Enter the port number for the mail server. The default is 25.
• Authentication—Check the box if your mail server requires authentication
and enter the following options:
- Account Name—Enter the account name to be used on the e-mail
server.
8
49