Defining Preset Locations For Auto Patrol - Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual

Sample Configurations for the Cisco WVC210 Internet Camera

Defining Preset Locations for Auto Patrol

STEP 2
STEP 3
STEP 4
Defining Preset Locations for Auto Patrol
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
On the Home window, click Start Recording in the Video Options Panel (see
Video Options Panel, page 29
Recording is enabled.
Click Save in the dialog box if you agree with the default location (\My
Documents\Record). Otherwise, click Browse and choose another location.
Click Stop Recording when you want to stop recording.
To define preset positions for the camera patrol sequence, follow these steps:
Access the setup options for your Cisco WVC210 Internet camera by clicking
Setup.
Log in as required.
Go to the Pan/Tilt window.
Use the PTZ Directional Movement arrows to set a preset position.
Name the position in the Current Position box.
Click Add. This position is now is your first preset position.
Continue to add more positions, up to 9.
When you are done setting preset positions, click Save.
for more information).
9
62