Page 1
Application Note ® Type 2EA Wi-Fi + Bluetooth Dual- Radio Module Infineon Chipset CYW55573 for 802.11a/b/g/n/ac/ax 2x2 MIMO + Bluetooth 5.3 Radio Law Certification Application Note - Rev. 2.0 ▪ Design Name: Type 2EA ▪ P/N: LBEE5XV2EA...
It is necessary to take a SAR test with your set mounting this module (except to use only Bluetooth). Class II permissive change application is necessary using the SAR report. Please contact Murata. And an application for a Class II permissive change from a Mobile equipment to a Portable equipment is also required.
Page 37
This module is only approved as mobile equipment. Therefore, do not install it on portable equipment. If you wish to use it as a portable equipment, please contact Murata in advance as Class II application accompanied by SAR testing using the final product are required.
Type 2EA Wi-Fi + Bluetooth Dual-Radio Module Compliant operation of the LBEE5XV2EA module is dependent on proper construction of this 50 Ω line and the following guidelines must be followed to ensure legal operation of the product. Figure 15 shows the required microstrip structure to be routed between module pin 22, 24 and the u.FL connector.
Need help?
Do you have a question about the LBEE5XV2EA and is the answer not in the manual?
Questions and answers