Download
Share
Print this page
Murata Type1XK Datasheet
  1. Manuals
  2. Brands
  3. Murata Manuals
  4. Control Unit
  5. Type1XK
  6. Datasheet

Murata Type1XK Datasheet

W-lan+bluetooth combo module
Hide thumbs

Advertisement

Quick Links

Download this manual
Specification Number: SP-CJ1XK-L
W-LAN+Bluetooth Combo Module Data Sheet
NXP IW416 Chipset
for 802.11a/b/g/n + Bluetooth 5.2
Design Name: Type1XK
P/N : LBEE5CJ1XK-687
< Specification may be changed by Murata without notice >
Murata Manufacturing Co., Ltd.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Type1XK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Murata Type1XK

Summary of Contents for Murata Type1XK

  • Page 1 Specification Number: SP-CJ1XK-L W-LAN+Bluetooth Combo Module Data Sheet NXP IW416 Chipset for 802.11a/b/g/n + Bluetooth 5.2 Design Name: Type1XK P/N : LBEE5CJ1XK-687 < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.
  • Page 2 - Defined IO current and Peak current 9.2 External Sleep Clock Requirements - Added a comment 10. Power Sequence - Defined timing parameters 14. Reference Circuit - Pull-down RF_CNTL2_N and updated descriptions. < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.
  • Page 3 12.7.1. Basic Data Rate Condition ....................33 12.7.2. Enhanced Data Rate Condition .................... 34 12.8. DC/RF Characteristics for Bluetooth Low Energy ............... 35 12.8.1. 1Mbps PHY Condition ......................35 12.8.2. 2Mbps PHY Condition ......................36 13. Land Patterns ............................. 37 Murata Manufacturing Co., Ltd.
  • Page 4 17. Preconditions to Use Our Products ....................45 APPENDIX ............................... 46 Please be aware that an important notice concerning availability, standard warranty and use in critical applications of Murata products and disclaimers thereto appears at the end of this specification sheet. Murata Manufacturing Co., Ltd.
  • Page 5 “ LBEE5CJ1XK ” is used in certification test report. 4. Block Diagram Type1XK PMIC VLDO1.8V IW416 SPDT VBAT VDD2.2V WLAN 5G Tx/Rx VDD1.1V PMIC_EN Sleep Clock SPDT (Option) WLAN 2.4G Tx/Rx SDIO UART Bluetooth Tx/Rx 26MHz Murata Manufacturing Co., Ltd.
  • Page 6 Country Code: JP Tx Power limit file free RTOS： wlan_txpwrlimit_cfg_JP.c Linux： txpwrlimit_cfg_JP.bin The each country code are defined by Murata’s db.txt file. Please ask your contact person from Murata. 5.2. Bluetooth Qualification QDID: 169159 *Set Bluetooth Tx Power to Class1 by using “bt_power_config_1.sh”.
  • Page 7 0.5 ± 0.1 0.35 ± 0.1 0.5 ± 0.1 0.5 ± 0.2 0.5 ± 0.2 0.045 typ. * T dimension does not include height of solder bumps. Structure Diplexer Switch PMIC IW416 Resin Mold Shield Solder Bump Substrate Murata Manufacturing Co., Ltd.
  • Page 8 SD_D0 RF_CNTL3_P SD_CMD GPIO(9) BT_ANT UART_RXD SHARED GPIO(6) BT_ANT GPIO(7) DEDICATED GPIO(4) GPIO(1) PMIC_EN GPIO(15) GPIO(11) WCI_SOUT UART_RTS GPIO(5) WCI_SIN GPIO(0) GPIO(8) GPIO(12) GPIO(13) UART_CTS GPIO(10) RF_CNTL1_P UART_TXD GPIO(14) RF_CNTL0_N SD_D3 GPIO(2) SD_D1 SLP_CLK_IN RF_ANT 57-81 Murata Manufacturing Co., Ltd.
  • Page 9 Power management mode: DVSC[1], Digital voltage scaling control (output) GPIO(3) GPIO[3] JTAG mode: JTAG_TDO, JTAG test data (output). PCM mode: PCM_MCLK (output) - PCM clock signal (output, optional). I2S mode: I2S_CCLK - I2S clock (output, optional). Ground VBAT PVIN(PMIC) Power supply Murata Manufacturing Co., Ltd.
  • Page 10 [2] The function can be swapped with GPIO[4] using a software command without affecting the hardware connection. [3] The function can be swapped with GPIO[5] using a software command without affecting the hardware connection. [4] If PCM and UART interfaces are used in application, use GPIO[0] as alternative for this wake-up signal Murata Manufacturing Co., Ltd.
  • Page 11 No hardware impact. Software reads and boots accordingly. See the table below. Note: Boot code needs to use this host boot strap status CON[0] RF_CNTL0_N to decide the correct boot sequence. CON[1] CON[0] Wi-Fi Bluetooth/LE SDIO UART Reserved Reserved Murata Manufacturing Co., Ltd.
  • Page 12 800K RF_CNTL3_P VIO_RF tristate input output drive high weak PU SLP_CLK_IN AVDD18 tristate input input tristate nominal PU 800K WCI-2_SIN AVDD18 tristate input input tristate weak PU 800K WCI-2_OUT AVDD18 tristate output output tristate weak PU Murata Manufacturing Co., Ltd.
  • Page 13 Data line 1 Interrupt SDIO_D2 DATA2 Data line 2 Read wait (optional) SDIO_D3 DATA3 Data line 3 Reserved SDIO_CMD Command/response Command line Type1XK Type1XK SD Host SD Host DATA DATA[3:0] (i) SD 4-bit Mode (ii) SD 1-bit Mode Murata Manufacturing Co., Ltd.
  • Page 14 Duty cycle tolerance Voltage input level = 1.8V 9.3. Digital I/O Requirements Symbol Parameter Condition Unit Input high voltage 0.7*VIO VIO+0.4 Input low voltage -0.4 0.3*VIO Input hysteresis Output high voltage - VIO-0.4 Output low voltage Murata Manufacturing Co., Ltd.
  • Page 15 VBAT and VIO must be down at the same time or before de-assert PMIC_EN (= 1 to 0).  Rump-down time of VIO must be <100ms VBAT PMIC_EN Symbol Parameter Unit PMIC_EN to VIO time msec VIO to VBAT time msec Murata Manufacturing Co., Ltd.
  • Page 16 SDIO Protocol Timing Diagram-High Speed Mode [1] [2] [1] For SDIO 2.0 running at 50 MHz clock frequency, VIO_SD must be 3.3V. For SDIO 2.0 running at 25 MHz and 50 MHz clock frequency, VIO_SD must be 3.3V. Murata Manufacturing Co., Ltd.
  • Page 17 Specification Number: SP-CJ1XK-L P. 16/84 11.1.3. SDR12,SDR25,SDR50 Modes(up to 100 MHz)(1.8V) SDIO Protocol Timing Diagram-SDR12,SDR25,SDR50 Mode(up to 100MHz)(1.8V) Murata Manufacturing Co., Ltd.
  • Page 18 Specification Number: SP-CJ1XK-L P. 17/84 11.1.4. DDR50 Mode(50MHz)(1.8V) SDIO CMD Timing Diagram-DDR50 Mode (50MHz) In DDR50 mode, DAT[3:0] lines are sampled on both edges of the clock (not applicable for CMD line). SDIO DATA Timing Diagram-DDR50 Mode Murata Manufacturing Co., Ltd.
  • Page 19 Specification Number: SP-CJ1XK-L P. 18/84 Murata Manufacturing Co., Ltd.
  • Page 20 Delay from PCM_CLK rising edge to PCM_DOUT rising edge Setup time for PCM_DIN before DISU PCM_CLK falling edge Hold time for PCM_DIN after DIHO PCM_CLK falling edge Delay from PCM_CLK rising edge to PCM_SYNC rising edge Murata Manufacturing Co., Ltd.
  • Page 21 Setup time for PCM_DIN before DISU PCM_CLK falling edge Hold time for PCM_DIN after DIHO PCM_CLK falling edge Setup time for PCM_SYNC before BFSU PCM_CLK falling edge Hold time for PCM_SYNC after BFHO PCM_CLK falling edge Murata Manufacturing Co., Ltd.
  • Page 22 8) 470-862MHz (BW=100kHz) 9) 862-1000MHz (BW=100kHz) 10) 1000-12750MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 9. Minimum Input Level (FER< 8%) 10. Maximum Input Level (FER < 8%) 11. Adjacent Channel Rejection (FER< 8%) Murata Manufacturing Co., Ltd.
  • Page 23 8) 470-862MHz (BW=100kHz) 9) 862-1000MHz (BW=100kHz) 10) 1000-12750MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 9. Minimum Input Level (FER< 8%) 10. Maximum Input Level (FER < 8%) 11. Adjacent Channel Rejection (FER< 8%) Murata Manufacturing Co., Ltd.
  • Page 24 8) 470-862MHz (BW=100kHz) 9) 862-1000MHz (BW=100kHz) 10) 1000-12750MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 7. Minimum Input Level (PER < 10%) 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection(PER< 10%) Murata Manufacturing Co., Ltd.
  • Page 25 8) 470-862MHz (BW=100kHz) 9) 862-1000MHz (BW=100kHz) 10) 1000-12750MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 7. Minimum Input Level (PER < 10%) 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection(PER< 10%) Murata Manufacturing Co., Ltd.
  • Page 26 8) 470-862MHz (BW=100kHz) 9) 862-1000MHz (BW=100kHz) 10) 1000-12750MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 7. Minimum Input Level (PER < 10%) 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection(PER< 10%) Murata Manufacturing Co., Ltd.
  • Page 27 8) 470-862MHz (BW=100kHz) 9) 862-1000MHz (BW=100kHz) 10) 1000-12750MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 7. Minimum Input Level (PER < 10%) 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection(PER< 10%) Murata Manufacturing Co., Ltd.
  • Page 28 10) 1000-5150MHz (BW=1MHz) 11) 5350-5470MHz (BW=1MHz) 12) 5725-26000MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 7. Minimum Input Level (PER < 10%) 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection (PER< 10%) Murata Manufacturing Co., Ltd.
  • Page 29 10) 1000-5150MHz (BW=1MHz) 11) 5350-5470MHz (BW=1MHz) 12) 5725-26000MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 7. Minimum Input Level (PER < 10%) 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection (PER< 10%) Murata Manufacturing Co., Ltd.
  • Page 30 10) 1000-5150MHz (BW=1MHz) 11) 5350-5470MHz (BW=1MHz) 12) 5725-26000MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 7. Minimum Input Level (PER < 10%) 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection (PER< 10%) Murata Manufacturing Co., Ltd.
  • Page 31 10) 1000-5150MHz (BW=1MHz) 11) 5350-5470MHz (BW=1MHz) 12) 5725-26000MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 7. Minimum Input Level (PER < 10%) 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection (PER< 10%) Murata Manufacturing Co., Ltd.
  • Page 32 10) 1000-5150MHz (BW=1MHz) 11) 5350-5470MHz (BW=1MHz) 12) 5725-26000MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 7. Minimum Input Level (PER < 10%) 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection (PER < 10%) Murata Manufacturing Co., Ltd.
  • Page 33 10) 1000-5150MHz (BW=1MHz) 11) 5350-5470MHz (BW=1MHz) 12) 5725-26000MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit 7. Minimum Input Level (PER < 10%) 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection (PER < 10%) Murata Manufacturing Co., Ltd.
  • Page 34 1) 1slot 2) 3slot / 5slot 3) Maximum drift rate kHz/50us - Rx Characteristics - Min. Typ. Max. Unit BR Sensitivity (BER<0.1%) Maximum Input Level (BER<0.1%) * Up to three spurious responses within Bluetooth limits are allowed. Murata Manufacturing Co., Ltd.
  • Page 35 7) 230-470MHz (BW=100kHz) 8) 470-862MHz (BW=100kHz) 9) 862-1000MHz (BW=100kHz) 10) 1000-12750MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit EDR Sensitivity (BER<0.007%)@8DPSK Maximum Input Level (BER<0.1%) * Up to three spurious responses within Bluetooth limits are allowed. Murata Manufacturing Co., Ltd.
  • Page 36 8) 470-862MHz (BW=100kHz) 9) 862-1000MHz (BW=100kHz) 10) 1000-12750MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit Receiver sensitivity (PER < 30.8%) -101 Maximum input signal level (PER < 30.8%) PER Report Integrity (-30dBm input) 65.4 Murata Manufacturing Co., Ltd.
  • Page 37 7) 230-470MHz (BW=100kHz) 8) 470-862MHz (BW=100kHz) 9) 862-1000MHz (BW=100kHz) 10) 1000-12750MHz (BW=1MHz) - Rx Characteristics - Min. Typ. Max. Unit Receiver sensitivity (PER < 30.8%) Maximum input signal level (PER < 30.8%) PER Report Integrity (-30dBm input) 65.4 Murata Manufacturing Co., Ltd.
  • Page 38 13. Land Patterns * To avoid the short-circuit between the side shielding and a solder on the module land after the reflow, please locate the module land at 0.2mm away from module outline as above figure. Murata Manufacturing Co., Ltd.
  • Page 39 TYPE1XK GPIO13 GPIO13 GND(21) GPIO10 GPIO10 GPIO3 GPIO3 SD_DAT[1] SD_D3 SLP_CLK_IN SLP_CLK_IN SD_DAT[3] SD_D1 GPIO2 GPIO2 57~81 GND(57~81) GPIP14 GPIO14 Pin10: Recommended grounding for mechanical strength. < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.
  • Page 40 SD_DAT[1] SD_D1 GPIO2 GPIO2 57~81 GND(57~81) GPIP14 GPIO14 (*1) Must copy Murata's reference circuitry and layout. (*2) Strapping option of WLAN/BT interface RF_CONTL2_N RF_CONTL0_N WLAN Bluetooth SDIO UART RF_CONTL2_N can be floating because it is weakly pull-up with 800kohm in the module.
  • Page 41 2.0±0.1 1.5+0.1/-0.0 0.3±0.05 4.0±0.1 1.5+0/-0.0 8.7±0.05 12.0±0.1 1.50 ±0.05 feeding direction (Unit : mm) (2) Dimensions of Reel 17.5 2±0.5 Φ13±2 22.5 max. (unit : mm) < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.
  • Page 42 Leader tape (No components) (Cover tape alone) 40 to 200mm 150mm min. 250mm min. (5) The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled toward the user. Murata Manufacturing Co., Ltd.
  • Page 43 (11) Packaging (Humidity proof Packing) Label 表示ラべル Desiccant 乾燥剤 Humidity 　湿度 Indicator インジケ－タ 表示ラベル Label 防湿梱包袋 Anti-humidity Plastic Bag Tape and reel must be sealed with the anti-humidity plastic bag. The bag contains the desiccant and the humidity indicator. Murata Manufacturing Co., Ltd.
  • Page 44 IN and OUT terminals. Please refer to the specifications for the standard land dimensions. The recommended land pattern and dimensions is as Murata's standard. The characteristics of products may vary depending on the pattern drawing method, grounding method, land dimensions, land forming method of the NC terminals and the PCB material and thickness.
  • Page 45 - Humid place where water condenses. - Freezing place. If there are possibilities for products to be used under the preceding clause, consult with Murata before actual use. As it might be a cause of degradation or destruction to apply static electricity to products, do not apply static electricity or excessive voltage while assembling and measuring.
  • Page 46 (“Software”) provided that you use the Software bundled with our product. YOU AGREE THAT THE SOFTWARE SHALL BE PROVIDED TO YOU “AS- IS” BASIS, MURATA MAKES NO REPRESENTATIONS OR WARRANTIES THAT THE SOFTWARE IS ERROR-FREE OR WILL OPERATE WITHOUT INTERRUPTION.
  • Page 47 Specification Number: SP-CJ1XK-L P. 46/84 APPENDIX Murata Manufacturing Co., Ltd.
  • Page 48 2. Radio Regulatory certification by country for LBEE5CJ1XK and LBEE5CJ2XK 日本電波法 < > < FCC > < ISED > < Europe > Precautions when using report number E2/2021/30010 ~ E2/2021/30015 (RF Conducted test result only) for final product DoC. Murata Manufacturing Co., Ltd.
  • Page 49 Humidity 　湿度 Indicator インジケ－タ Label 表示ラベル Label Anti-humidity Label 防湿梱包袋 Plastic Bag The package label may be attached on one side only. The above pictures are examples. It may be attached to only one of them. Murata Manufacturing Co., Ltd.
  • Page 50 P. 49/84 Country of Origin China SHENZHEN MURATA TECHNOLOGY CO., LTD. Some countries have applied for two countries, China and Japan, in preparation for future factory changes, but the production site in the delivery specifications is the above-mentioned factory in China.
  • Page 51 2.4GHz 帯高度化小電力データ通信システム 証明規則第 2 条第 1 項第 19 号の 3 の無線設備 5GHz 帯小電力データ通信システム 認可製品概要 当モジュールは無線設備規則第 49 条の 20 に規定する小電力データ通信システムの無線設備です。 内蔵する無線設備は認証 IEEE802.11a/b/g/n および Bluetooth V5.2 基準に準拠した設備で、データ等を送受 信をする装置として使用されます。また、2.4GHz と 5GHz(W52、W53、W56)で使用する設備です。W52 は親 局、 子局として動作します。(モジュールの機能は W58 も含みますが、日本用の仕様ではソフト等で W58 を使用で き ないように制限する必要があります) Murata Manufacturing Co., Ltd.
  • Page 52 206994 アンテナメーカ Molex 種別 Monopole antenna アンテナゲイン（申請値） +3.6dBi@2.4GHz +3.6dBi@5GHz 周波数 2400-2500MHz 5150-5850MHz 表記要件について 下記①または②の内容を、当モジュールを組み込む製品に記載を推奨します。 製品上への表示（①または②）に支障がある場合は当モジュールを組み込む製品のユーザーマニュアルや包 装（梱包）パッケージへの表示または電子表示を推奨いたします。 電子表示の場合は、 『電子表示していること』＋『その表示までの操作方法』を製品のマニュアルに記載いた だく必要がございます。 ********** ① 【本製品は、電波法に基づく工事設計認証(認証番号:001-P01624)を受けた特定無線設備を内蔵していま す。 】 もしくは ② 技適マーク+R マーク+モジュールの電波法の認証番号を製品上への表示と下記文言の表示 【5.2GHz/5.3GHz 帯無線 LAN(W52/W53)の屋外使用は 5.2GHz 帯高出力データ通信システムの基地局又は陸 上移動中継局と通信する場合を除き電波法で禁止されています。 】 ********** Murata Manufacturing Co., Ltd.
  • Page 53 *DFS MASTER function not available. *DFS client function available. *There is a TPC function. Frequency of Operation Scan Ad-hoc node 2402~2480MHz 2402~2480MHz 2402~2480MHz LE 2Mbps 2402~2480MHz LE (Long Range) 125kbps 2402~2480MHz LE (Long Range) 500kbps 2402~2480MHz Murata Manufacturing Co., Ltd.
  • Page 54 Specification Number: SP-CJ1XK-L P. 53/84 総務省への届出について 当モジュールは当初 LBEE5CJ1XK で電波法の認可を得ておりましたが、総務省へ以下の届出を行い 型式又は名称（端末機器の名称）が「LBEE5CJ1XK」から「LBEE5CJ1XK 又は LBEE5CJ2XK」になってお ります。 総務省への届出内容 変更した事項 型式又は名称の変更 変更前： LBEE5CJ1XK 変更後： LBEE5CJ1XK又はLBEE5CJ2XK 変更した年月日 2021年8月19日 変更理由 すでに型式又は名称を LBEE5CJ1XK、認証番号 001-P01624として 認証を得ております。これは下記、『WLAN/BT 共通アンテナ設定の 構成』も『BT専用アンテナ設定の構成』も両方可能な認証です。 しかし管理が複雑になるため、型式名称以外は同一設計のモジュ ールをLBEE5CJ2XKとして新規に設け、それぞれにデフォルトのア ンテナ設定の構成を定めることにしたく品名追加変更を行いました。 LBEE5CJ1XK: デフォルトがWLAN/BT共通アンテナ設定で使用 LBEE5CJ2XK: デフォルトがWLAN/BT各専用アンテナ設定で使用 Murata Manufacturing Co., Ltd.
  • Page 55 *If it is difficult to describe this statement on the host device due to the size, please describe in the user's manual and also either describe on the device packaging or on a removable label attached to the device Murata Manufacturing Co., Ltd.
  • Page 56 Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: ±20 ppm Murata Manufacturing Co., Ltd.
  • Page 57 9.1±0.2 8.3±0.2 1.3 max 0.25±0.1 0.5±0.1 0.8±0.2 0.3±0.2 0.3±0.2 0.3±0.2 0.3±0.2 0.25±0.1 0.5±0.1 0.8±0.1 0.38±0.1 0.25±0.1 0.48±0.1 0.25±0.1 0.75±0.1 0.5±0.1 0.35±0.1 0.5±0.1 0.5±0.2 0.5±0.2 0.045 typ. ⚫ T dimension does not include height of solder bumps. Murata Manufacturing Co., Ltd.
  • Page 58 GPIO(3)TDO SD_D2 VBAT SD_CLK VBAT RF_CONTL2_N SD_D0 RF_CONTL3_P SD_CMD GPIO(9)UART_RXD BT_ANTSHARED GPIO(6) GPIO(7) BT_ANTDEDICATED GPIO(4) GPIO(1) PMIC_EN GPIO(15)TMS WCI_SOUT GPIO(11)UART_RTS GPIO(5) WCI_SIN GPIO(0) GPIO(8)UART_CTS GPIO(12) GPIO(13) RF_CONTL1_P GPIO(10)UART_TXD GPIO(14)TCK RF_CONTL0_N SD_D3 GPIO(2)TDI SD_D1 SLP_CLK_IN RF_ANT 57-81 Murata Manufacturing Co., Ltd.
  • Page 59 MAXIMUM TUNE UP TOLERANCE [dBm] Shared BT Antenna (PIN No.45) Dedicated BT Antenna (PIN No.47) 3.0±3.0 3.3±3.0 0.0±3.0 0.3±3.0 3.0±3.0 3.3±3.0 LE 2Mbps 3.0±3.0 3.3±3.0 LE (Long Range) 125kbps 3.0±3.0 3.3±3.0 LE (Long Range) 500kbps 3.0±3.0 3.3±3.0 Murata Manufacturing Co., Ltd.
  • Page 60 *DFS MASTER function not available. *DFS client function available. *There is a TPC function. Frequency of Operation Scan Ad-hoc node 2402~2480MHz 2402~2480MHz 2402~2480MHz LE 2Mbps 2402~2480MHz LE (Long Range) 125kbps 2402~2480MHz LE (Long Range) 500kbps 2402~2480MHz Murata Manufacturing Co., Ltd.
  • Page 61 Antenna Gain 3.6dBi@2.4GHz / 4.6dBi@5GHz Frequency 2400-2484MHz / 5250-5850MHz Connector For “146153” and “146187”, please refer to the information such as the antenna data sheet of Molex. For “LBEE5CJ1XK-Antenna” Antenna DUT during certification test unit: mm Murata Manufacturing Co., Ltd.
  • Page 62 Specification Number: SP-CJ1XK-L P. 61/84 Tuning1 Tuning2 Tuning3 Tuning4 1Matching circuit Shunt1 Series1 Shunt2 Series2 Shunt3 Series3 Sunt4 2.0nH 0.1pF 4.0nH 0ohm 10nH 0.8pF None 1.5nH 0.2pF 0ohm None Size: 0603 LQP03 / GRM03 / Resister Direction Murata Manufacturing Co., Ltd.
  • Page 63 The concrete contents of a check are the following three points. １）It is the same type as the antenna type of antenna specifications. ２）An antenna gain is lower than a gain given in antenna specifications. ３）The emission level is not getting worse. Murata Manufacturing Co., Ltd.
  • Page 64 For "146153" and "146187" antennas, you need to make a copy of this EVB design from the feedline to the antenna connector. For " LBEE5CJ1XK-Antenna " antennas, you need to copy the entire antenna design, including the feedline. The following si the design of EVB used for the certification test Murata Manufacturing Co., Ltd.
  • Page 65 146153 / 146187 146153 / 146187 Refer to diagram b Dedicated BT Antenna LBEE5CJ1XK-Antenna 146153 / 146187 Refer to diagram c connection configuration 146153 / 146187 146153 / 146187 Refer to diagram d diagram a Murata Manufacturing Co., Ltd.
  • Page 66 Specification Number: SP-CJ1XK-L P. 65/84 diagram b diagram c diagram d Murata Manufacturing Co., Ltd.
  • Page 67 “LBEE5CJ2XK”. And we made an addition and change of the product name to decide the configuration of the default antenna setting for each. This is a ClassⅠ permissive change. LBEE5CJ1XK: default is used with WLAN/BT shared antenna setting LBEE5CJ2XK: default is used with WLAN/BT dedicated antenna setting Murata Manufacturing Co., Ltd.
  • Page 68 Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. Murata Manufacturing Co., Ltd.
  • Page 69 : Dipole Antenna Gain: 3.2 dBi@2.4GHz/4.25 dBi@5GHz : Dipole Antenna Gain: 3.4 dBi@2.4GHz/4.75 dBi@5GHz : Monopole Antenna Gain: 3.6 dBi@2.4GHz/4.6 dBi@5GHz for indoor use only(5150-5250MHz band and channel 52,54) Pour usage intérieur seulement (5150-5250MHz band and channel 52,54) Murata Manufacturing Co., Ltd.
  • Page 70 (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain. Murata Manufacturing Co., Ltd.
  • Page 71 9.1±0.2 8.3±0.2 1.3 max 0.25±0.1 0.5±0.1 0.8±0.2 0.3±0.2 0.3±0.2 0.3±0.2 0.3±0.2 0.25±0.1 0.5±0.1 0.8±0.1 0.38±0.1 0.25±0.1 0.48±0.1 0.25±0.1 0.75±0.1 0.5±0.1 0.35±0.1 0.5±0.1 0.5±0.2 0.5±0.2 0.045 typ. ⚫ T dimension does not include height of solder bumps. Murata Manufacturing Co., Ltd.
  • Page 72 GPIO(3)TDO SD_D2 VBAT SD_CLK VBAT RF_CONTL2_N SD_D0 RF_CONTL3_P SD_CMD GPIO(9)UART_RXD BT_ANTSHARED GPIO(6) GPIO(7) BT_ANTDEDICATED GPIO(4) GPIO(1) PMIC_EN GPIO(15)TMS WCI_SOUT GPIO(11)UART_RTS GPIO(5) WCI_SIN GPIO(0) GPIO(8)UART_CTS GPIO(12) GPIO(13) RF_CONTL1_P GPIO(10)UART_TXD GPIO(14)TCK RF_CONTL0_N SD_D3 GPIO(2)TDI SD_D1 SLP_CLK_IN RF_ANT 57-81 Murata Manufacturing Co., Ltd.
  • Page 73 MAXIMUM TUNE UP TOLERANCE [dBm] Shared BT Antenna (PIN No.45) Dedicated BT Antenna (PIN No.47) 3.0±3.0 3.3±3.0 0.0±3.0 0.3±3.0 3.0±3.0 3.3±3.0 LE 2Mbps 3.0±3.0 3.3±3.0 LE (Long Range) 125kbps 3.0±3.0 3.3±3.0 LE (Long Range) 500kbps 3.0±3.0 3.3±3.0 Murata Manufacturing Co., Ltd.
  • Page 74 *DFS MASTER function not available. *DFS client function available. *There is a TPC function. Frequency of Operation Scan Ad-hoc node 2402~2480MHz 2402~2480MHz 2402~2480MHz LE 2Mbps 2402~2480MHz LE (Long Range) 125kbps 2402~2480MHz LE (Long Range) 500kbps 2402~2480MHz Murata Manufacturing Co., Ltd.
  • Page 75 Antenna Gain 3.6dBi@2.4GHz / 4.6dBi@5GHz Frequency 2400-2484MHz / 5250-5850MHz Connector For “146153” and “146187”, please refer to the information such as the antenna data sheet of Molex. For “LBEE5CJ1XK-Antenna” Antenna DUT during certification test unit: mm Murata Manufacturing Co., Ltd.
  • Page 76 Specification Number: SP-CJ1XK-L P. 75/84 Tuning1 Tuning2 Tuning3 Tuning4 1Matching circuit Shunt1 Series1 Shunt2 Series2 Shunt3 Series3 Sunt4 2.0nH 0.1pF 4.0nH 0ohm 10nH 0.8pF None 1.5nH 0.2pF 0ohm None Size: 0603 LQP03 / GRM03 / Resister Direction Murata Manufacturing Co., Ltd.
  • Page 77 The concrete contents of a check are the following three points. １）It is the same type as the antenna type of antenna specifications. ２）An antenna gain is lower than a gain given in antenna specifications. ３）The emission level is not getting worse. Murata Manufacturing Co., Ltd.
  • Page 78 For "146153" and "146187" antennas, you need to make a copy of this EVB design from the feedline to the antenna connector. For " LBEE5CJ1XK-Antenna " antennas, you need to copy the entire antenna design, including the feedline. The following si the design of EVB used for the certification test Murata Manufacturing Co., Ltd.
  • Page 79 146153 / 146187 146153 / 146187 Refer to diagram b Dedicated BT Antenna LBEE5CJ1XK-Antenna 146153 / 146187 Refer to diagram c connection configuration 146153 / 146187 146153 / 146187 Refer to diagram d diagram a Murata Manufacturing Co., Ltd.
  • Page 80 Specification Number: SP-CJ1XK-L P. 79/84 diagram b diagram c diagram d Murata Manufacturing Co., Ltd.
  • Page 81 “LBEE5CJ1XK” and “LBEE5CJ2XK” have the same design except for the type name, but the type name is separated according to the antenna setting for management. LBEE5CJ1XK: default is used with WLAN/BT shared antenna setting LBEE5CJ2XK: default is used with WLAN/BT dedicated antenna setting Murata Manufacturing Co., Ltd.
  • Page 82 à transmettre ou de défaillance. *If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. Murata Manufacturing Co., Ltd.
  • Page 83 Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. Murata Manufacturing Co., Ltd.
  • Page 84 MAXIMUM TUNE UP TOLERANCE [dBm] Shared BT Antenna (PIN No.45) Dedicated BT Antenna (PIN No.47) 3.0±3.0 3.3±3.0 0.0±3.0 0.3±3.0 3.0±3.0 3.3±3.0 LE 2Mbps 3.0±3.0 3.3±3.0 LE (Long Range) 125kbps 3.0±3.0 3.3±3.0 LE (Long Range) 500kbps 3.0±3.0 3.3±3.0 Murata Manufacturing Co., Ltd.
  • Page 85 *DFS MASTER function not available. *DFS client function available. *There is a TPC function. Frequency of Operation Scan Ad-hoc node 2402~2480MHz 2402~2480MHz 2402~2480MHz LE 2Mbps 2402~2480MHz LE (Long Range) 125kbps 2402~2480MHz LE (Long Range) 500kbps 2402~2480MHz Murata Manufacturing Co., Ltd.