STEELGREEN SG46 Instruction Manual

35 gallon tank attachment

Hide thumbs Also See for SG46:

Instruction manual (16 pages)

Operator's manual (80 pages)

Operators & service manual (40 pages)

page of 13

/ 13
Bookmarks

Quick Links

Download this manual

INSTRUCTION MANUAL

35 GALLON TANK ATTACHMENT

Models: SG46, & SG52

Need help?

Do you have a question about the SG46 and is the answer not in the manual?

Questions and answers

Summary of Contents for STEELGREEN SG46

Page 1 INSTRUCTION MANUAL 35 GALLON TANK ATTACHMENT Models: SG46, & SG52...
Page 2 35 GALLON INSTALL INSTRUCTIONS STEP 1: • Disconnect the battery, ground first and then power wire. • Remove the battery from the battery box. GROUND POWER STEP 2: Disconnect the hoses from the hopper. NOTE: Hold the hoses up to prevent oil spillage...
Page 3 35 GALLON INSTALL INSTRUCTIONS STEP 3: QUICK CONNECT INSTALL NOTE: Be sure the hopper is drained before starting the following steps. • Remove the grate. • Disconnect the hopper motor hoses from the bulk- head fittings. • Remove the bulkhead fittings from the hopper.
Page 4 35 GALLON INSTALL INSTRUCTIONS • Attach the quick couplers provided with the kit to the hopper. NOTE: Be sure the FEMALE quick connect is on the LEFT SIDE (SHOWN BLUE) and the MALE quick connect is on the RIGHT SIDE (SHOWN RED). •...
Page 5 35 GALLON INSTALL INSTRUCTIONS • Connect the FEMALE end provided with the kit, to the end of the RIGHT SIDE hose. • Connect the MALE end provided with the kit, to the end of the LEFT SIDE hose. LEFT RIGHT •...
Page 6 35 GALLON INSTALL INSTRUCTIONS STEP 4: Disconnect the cables from the dash. DIFFUSER RATE GATE DEFLECTOR NOTE: Be sure the hopper is empty before proceeding. STEP 5: Remove the six bolts that hold the hopper as- sembly to the frame and lift the hopper assembly from the frame.
Page 7 35 GALLON INSTALL INSTRUCTIONS STEP 6: • Set the 35 gallon tank assembly on the frame. • Attach it to the frame with the six bolts.
Page 8 35 GALLON INSTALL INSTRUCTIONS STEP 7: Attach the valve assembly to the upright left side using (2) CB-3834 & (2) HFNCS-38. VALVE ASSEMBLY VALVE ASSEMBLY W/FOAM MARKER...
Page 9 35 GALLON INSTALL INSTRUCTIONS NOTE: • Before beginning step seven, BE SURE there is no pressure on the lines and fluid is drained. • Parts removed for clarity. STEP 8: • Remove the knee pad to access the return & suction lines.
Page 10 35 GALLON INSTALL INSTRUCTIONS STEP 9: SUCTION • Cut and install 1” suction hose, connecting one end to the suction fitting on the top valve and the other end to the “tee” fitting in the suction line. • Cut and install 3/4” return hose, connecting one end to the return fitting on the bottom valve and the other end to the “tee”...
Page 11 35 GALLON INSTALL INSTRUCTIONS STEP 10: Connect the “quick disconnect” hos- es from the tank to the valves. • Top valve is SUCTION. • Bottom valve is RETURN. VALVE ASSEMBLY VALVE ASSEMBLY W/FOAM MARKER SUCTION RETURN...
Page 12 35 GALLON INSTALL INSTRUCTIONS STEP 11: • Set the battery in the battery box. • Reconnect the battery cables, power ca- ble and wires first followed by the ground wire. • Attach the battery box cover and bungie strap. GROUND POWER...
Page 13 MADE IN THE USA Steel Green Mfg. 824 S State Road 39 MANUAL MANUAL DESCRIPTION Lebanon, IN 46052 PART NO. REV. PART NO. (765)-481-2890 www.steelgreenmfg.com SGM-008 35 GALLON TANK ATTACHMENT A10034...

This manual is also suitable for:

Sg52