Regulatory Agency Notices; Regulatory Compliance Identification Numbers; Modem Notices; Telecommunications Device Approvals - HP ap5000 - All-in-One Point of Sale System Safety And Regulatory Information Manual

Safety and regulatory information hp ap5000 all-in-one point of sale system
Hide thumbs Also See for ap5000 - All-in-One Point of Sale System:
Table of Contents

Advertisement

2

Regulatory Agency Notices

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your product has been
assigned a unique HP Regulatory Model Number (RMN). The RMN can be found on the product
nameplate label, along with all required approval markings and information. When requesting
compliance information for this product, always refer to this RMN. The RMN should not be confused
with the marketing name or model number of the product.

Modem Notices

WARNING!
always follow basic safety precautions, including the following:
Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundry
tub, in a wet basement, or near a swimming pool.
Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning.
Do not use this product to report a gas leak while in the vicinity of the leak.
Always disconnect the modem cable before opening the equipment enclosure or touching an
uninsulated modem cable, jack, or internal component.
If this product was not provided with a telephone line cord, use only No. 26 AWG or larger
telecommunication line cord.
Do not plug a modem or telephone cable into the RJ-45 (network) jack.
SAVE THESE INSTRUCTIONS

Telecommunications Device Approvals

The telecommunications device in the computer is approved for connection to the telephone network in
the countries and regions whose approval markings are indicated on the product label located on the
bottom of the computer or on the modem.
Refer to the user guide included with the product to ensure that the product is configured for the country
or region in which the product is located. Selecting a country or region other than the one in which it is
located may cause the modem to be configured in a way that violates the telecommunication regulations/
laws of that country or region. In addition, the modem may not function properly if the correct country
or region selection is not made. If, when you select a country or region, a message appears that states
that the country or region is not supported, this means that the modem has not been approved for use
in this country or region and thus should not be used.
ENWW
To reduce the risk of fire, electric shock, and injury to persons when using this device,
Regulatory Compliance Identification Numbers
7

Hide quick links:

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents