Use A Connection That Combines Hdmi With Dvi - Cisco DMS-DMP-4300G User Manual

Procedures
Step 3
Turn On the presentation system.
Step 4
Stop. You have completed this procedure.
Related Topics
•
•

Use a Connection that Combines HDMI with DVI

Timesaver
Is your display a touchscreen? If so, this topic is not for you. Instead, see the
section on page
HDMI and DVI differ in their support for audio signals and use connectors that are shaped differently,
but otherwise are identical. Thus, an adapter can help you to connect to your DMP any presentation
system that supports DVI but not HDMI. When you do this, however, you must also use a separate signal
cable to transmit audio signals, or there will not be any audio.
Before You Begin
•
Procedure
Step 1
Make connections for video.
a.
b.
c.
Step 2
Make connections for audio.
a.
b.
Step 3
If the presentation system is not already turned on, turn it On now.
Step 4
Stop. You have completed this procedure.
Related Topics
•
•
User Guide for Cisco Digital Media Player Device Manager 5.2.x
6-6
Physical Interfaces (I/O Ports), page 2-4
Use a Connection that Combines HDMI with DVI, page 6-6
6-7.
Obtain an HDMI-to-DVI adapter.
Connect the HDMI cable to the HDMI interface on the back panel of your DMP.
Fasten an HDMI-to-DVI adapter to the free end of the cable.
Connect the free end of the DVI adapter to the corresponding interface on your presentation system.
Plug the 3.5mm audio jack into the Audio interface on the back panel of your DMP.
Connect the other end of the audio cable to the corresponding interface on your presentation system.
Physical Interfaces (I/O Ports), page 2-4
Use an HDMI Connection, page 6-5
Chapter 6 Connect to a Presentation System
"Connect to a Touchscreen"
OL-15764-03