Adjust Whether Tvzilla Is Transparent, Translucent, Or Opaque; Specify Which Url To Load In Tvzilla - Cisco DMS-DMP-4300G User Manual

Procedures

Adjust Whether TVzilla is Transparent, Translucent, or Opaque

When you simultaneously play videos and run TVzilla, the "HTML content" plane is always on top of
(in front of) the "video content" plane. However, you can adjust the visual density of TVzilla, so that it
is fully opaque, fully transparent, or any degree of translucency between those two extremes.
The "video content" plane is always fully opaque. You cannot adjust it.
Procedure
Step 1
Click Transparency in the Display Actions list.
Step 2
Enter or edit the required values.
Step 3
Click Apply to confirm that you are satisfied with the entry or change that you made and to record it in
volatile memory.
After you click Apply, the entry or change takes effect. However, the previously defined value will return
the next time that your DMP restarts.
Step 4
(Optional) Would you like to put all values into effect permanently, so that they persist even after your
DMP restarts? Choose Administration > Save Configuration and, when the Save Configuration page
appears, click Save.
Step 5
Stop. You have completed this procedure.
Related Topics
•

Specify Which URL to Load in TVZilla

You can load a web page or other content on the HTML content plane (TVzilla). The HTTP URL that
you enter persists until you use this procedure again to enter a different URL or until the next time that
you restart your DMP. You cannot save the URL entry so that it persists after a restart.
Procedure
Step 1
Click URL to be Displayed in the Display Actions list.
Step 2
Enter or edit the HTTP URL, and then click Go.
Step 3
(Optional) Would you like to stop showing the specified content? Do one of the following.
•
•
Step 4
Stop. You have completed this procedure.
Related Topics
•
User Guide for Cisco Digital Media Player Device Manager 5.2.x
13-6
UI Reference: Elements to Define Transparency Settings for HTML Content, page 13-11
Click .
Enter an HTTP URL that points to different content, and then click Go.
UI Reference: Elements to Specify Which URL TVzilla Should Load, page 13-11
Chapter 13 Browser Settings ('TVzilla')
OL-15764-03