Chapter 1 Health And Safety Overview - Cisco DMS-DMP-4300G User Manual

General Precautions
General Precautions
Observe the following precautions.
•
•
•
•
•
Protect Against Electrostatic Discharge
Static electricity might harm sensitive components. To prevent this damage, discharge static electricity
from your body before you touch equipment. You can also take the following steps to prevent damage
that might result from electrostatic discharge.
•
•
•
Regulatory Compliance and Safety Information
See http://cisco.com/en/US/products/ps7220/prod_installation_guides_list.html.
User Guide for Cisco Digital Media Player Device Manager 5.2.x
1-2
Never open the equipment. Only an authorized technician should service its components.
If any of the following conditions occur, unplug the equipment and contact an authorized technician.
The power cable, extension cord, or plug is damaged.
–
Any foreign object has entered the equipment.
–
The equipment has been exposed to or any liquid.
–
The equipment has been dropped or damaged.
–
The equipment does not operate correctly when you follow its operating instructions.
–
Do not spill anything on the equipment.
Observe extension cord and power strip ratings. Make sure that the total ampere rating of all
products plugged into the extension cord or power strip does not exceed 80 percent of the extension
cord or power strip ampere ratings limit.
Do not modify power cords or plugs. Consult a licensed electrician or your power company for site
modifications. Always follow your local and national wiring rules.
When transporting equipment, first place it in an antistatic container or packaging.
Do not leave equipment where other people can handle and possibly damage it.
Take additional care when handling equipment during cold weather. Heating reduces indoor
humidity and increases static electricity.
Chapter 1 Health and Safety Overview
OL-15764-03