Protecting Images - Toshiba Gigashot GSC-R60 Owner's Manual

Protecting Images

To prevent images from being inadvertently erased, you can make them read-only files.
Images with this status are referred to as "protected" images.
ATTENTION
• Formatting erases all your images, including protected images. Erased images
cannot be restored.
Selecting and Protecting Images
1
From the play menu, use the jog dial to select [PROTECT]
and press the OK button.
PLAY MENU
AUTO PLAY
PROTECT
EXIT
2
Use the jog dial to select the image to be protected and
press the OK button.
PROTECT
PREVIOUS ALBUM
SELECT ALL
OK
SELECT
3
Move the OK button to
button.
The images are protected and the play menu reappears.
If you do not want to protect the images, select [CANCEL] and press the OK button.
Confirming Images in Enlarged View
In step 2, slide the zoom lever towards T.
Sliding towards W in enlarged view will return to the protection settings screen.
Protecting all Images in an Album
In step 2, move the OK button to
button.
MEMO
• The [ ] icon is displayed for protected images on the playback screen and when
protection is set.
• To protect an entire SD card, see "Write-protection" (
• Several hours may be required if you are setting protection for a large volume of
ERASE
COPY
MOVE
The [
101-0001
To remove the protection, press the OK button again.
To protect multiple images, repeat this procedure. To
move to the previous or next album, move the OK button
CLEAR ALL
to
CANCEL
] icon appears below the protected image.
or respectively.
to select [OK] and press the OK
to select [SELECT ALL], then press the OK
p.22).