Protecting Data On An Sd™ Card - Toshiba PA3973U-1C0K Camileo X200 User Manual

Inserting and removing an SD™ Card (optional)
2 Insert the memory card into the slot until it locks in place as
shown below.
(Sample Illustration) Inserting and removing an SD™ Card
NOTE
Protecting data on an SD™ Card
Photos or videos cannot be recorded on an SD™ Card when the
card is locked (read only); however, photos and videos can be
viewed.
Make sure the lock is in the writable position before recording
photos and videos as shown below.
Writable
position
(Sample Illustration) Protecting data on an SD™ Card
To prevent data corruption, it is recommended that you format the
SD™ Card in the camcorder before using.
All data will be erased if the SD™ Card is formatted. Make sure all
data is copied to your computer or other media before formatting the
SD™ Card.
When a memory card is inserted, photos and videos are saved onto
the card rather than the built-in memory.
Write-protected
position
Getting Started
To remove the
SD™ Card, press
inward to release
it. When the card
pops out, grasp
it and pull it
straight out.
21