Selecting The Metering Mode - Toshiba Gigashot GSC-R60 Owner's Manual

Selecting the Metering Mode

Use this procedure to specify the metering mode used for exposure calculation.
POINT
• Using the [SPOT] setting for backlit subjects enables you to match the exposure
for a specific subject.
ATTENTION
• If the metering point is too bright, the photographed image will be dark.
• If the metering point is too dark, the photographed image will be washed out.
1
From the recording menu, use the jog dial to select
[METERING MODE] and press the OK button.
■ RECORDING MENU
MICROPHONE SENSITIVITY
DIGITAL ZOOM
METERING MODE
AF MODE
EXIT
2
Use the jog dial to select [CENTER WEIGHTED] or [SPOT]
and press the OK button.
METERING MODE
CENTER WEIGHTED
SPOT
COLOR
The selected metering mode is set and the recording
menu reappears.
To cancel the setting, press the MENU button.
CENTER WEIGHTED
CANCEL
SPOT : The camera sets the exposure by metering just a
: The camera sets the exposure by metering the
entire image but with particular emphasis on the
central part of the image.
very small area at the center of the image.