Error Messages - Toshiba Gigashot GSC-R60 Owner's Manual

Error Messages

The messages listed below indicating an error or status may be displayed on the screen.
Message
NO CARD
NO AVAILABLE
MEMORY
NO IMAGE
NO TARGET IMAGE.
WRITE-PROTECTED
CARD
PROTECTED IMAGE
FILE NUMBER IS FULL The file numbers have reached "9999".
TOO MANY IMAGES
VIDEOS CANNOT BE
EDITED
DPOF ERROR
LIST FILE ERROR
CANNOT USE THIS
CARD.
THIS CARD IS NOT
FORMATTED.
GROUP NAME OR
PASSWORD NOT
INPUT.
CANNOT CONNECT
TO NETWORK
TARGET CONNECTION
NOT FOUND.
CONNECTION
CLEARED.
TRANSFER ERROR
HAS OCCURRED.
NOT APPLICABLE
FOR PictBridge.
PRINTER ERROR
There is no SD card inserted.
There is no available space on the specified drive.
There are no images on the specified drive or album.
There are no images required for the operation.
You attempted to write data to a locked card.
You attempted to erase, move or edit a protected image.
When transferring images to the DVD recorder with DVR, you
exceeded the limit on the number of files on the DVD recorder
with DVR.
The number of images has reached 32,000.
You attempted to edit a videos shot on a different brand of
camera.
A DPOF-related error occurred.
A DVD creation list error occurred.
The card used is damaged or incompatible.
The SD card used is not formatted or is formatted using
NTFS.
A group name or password required for LAN connection has
not been input.
The camera cannot connect to the network in LAN mode.
There is no DVD recorder with DVR on the network.
The connection was cancelled due to an error during LAN
connection.
An error occurred while data was being transferred to the
DVD recorder with DVR.
The connected printer does not support PictBridge.
A printer error occurred during PictBridge connection.
Explanation